Introduction to Starch transportation, advantages, characteristics and principles of pneumatic conveying

Starch transportationis a kind of material conveying equipment which combines jet technology and fluidization technology.，is a Starch transportation，it has the functions of Explosion-proof involves, Automatic control, Environmental protection and pollution-free, material handling and Closed conveying，widely used in chemical plant, transportation, building material, building materials, metallurgy and other fields，Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dry.、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、The material is completely closed in the whole conveying process.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.。The following is to introduce the Starch transportation:

1、Brief introduction of Starch transportation

Starch transportationis a reliable material conveying equipment for conveying powdery materials under high pressure.，the product looks beautiful.，was developed and designed by hyde。

Starch transportation

2、Starch transportation principle

Starch transportationCompressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，widely used inmedicine,power,pharmaceutical factory,heat-engine plant,grain processing and other industries，features include Quantitative transportation, Reduce material loss, Wide range of conveying materials, Avoid material pollution and Flexible pipeline layout，it has the characteristics of Centralized transportation, Various processes, Stable operation, Reliable operation and Less maintenance.，customizable。

Starch transportation

3、Starch transportation explanation video

The following is the live video of Starch transportation designed and produced by hyde powder for users, from which we can see the the advantage is Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as smash.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.、Can be transported from one point to one place or from one point to many points.、The whole conveying process is sealed.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation. of hydeproduction and processing的Starch transportation.。

Starch transportation

As you can see from the live video.，hyde is a common Starch transportation。

4、Starch transportation application

Starch transportations have the following purposes.

1. Adapt to complex environment

The Starch transportation system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Starch transportation pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

2. Dust removal and purification

The Starch transportation system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. save energy and cut emissions

Although the Starch transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. material handling

Starch transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. cut down on energy consumption

Although the power consumption of the Starch transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Starch transportation

5、Starch transportation characteristics

Starch transportationGood dustproof effect,Easy to realize automation,Good dustproof effect,Flexible layout,Convenient operation and management，It uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，is a popular Starch transportation。

Starch transportation

6、Starch transportation price advantage

The Starch transportation price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Starch transportation have more or less differences in price.

2. product model

Products generally have a variety of specifications and models to meet the multiple needs of manufacturing. The same is true for Starch transportation, which have different models and different performances. Therefore, these are all factors that affect the price change of Starch transportation.

3. company strength

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. hyde powder's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. manufacturing cost

The cost of manufacturing Starch transportation varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

Starch transportation

Starch transportationIn the process of conveying, various technological operations can be carried out at the same time, such as be broken.、The conveying system is closed.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、Remote operation can be carried out from several points to one place in a centralized way or from one place to several points in a decentralized way.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.，the product looks beautiful.，the main features are Simple system, Save manpower, Large conveying capacity, Easy maintenance and Flexible conveying distance。