Introduction to Lithium manganese oxide pneumatic conveying, advantages, characteristics and principles of pneumatic conveying

Lithium manganese oxide pneumatic conveyingis a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，is a Lithium manganese oxide pneumatic conveying，multifunctional, with functions such as material handling, Physical processing assistance, material handling, Environmental protection and pollution-free and Explosion-proof involves，It can be used for Multi-point transportation, material handling, Heating, cooling and drying, cut down on energy consumption, Process assistance, Long distance transportation and so on，it has the characteristics of Quantitative transportation, Convenient operation and management, Large conveying capacity, Reduce material loss and Convenient for material transportation and recovery.。The following is to introduce the Lithium manganese oxide pneumatic conveying:

1、Brief introduction of Lithium manganese oxide pneumatic conveying

Lithium manganese oxide pneumatic conveyingmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.，it can be used in metallurgy, chemical industry, grain processing, logistics, medicine and other industries。

Lithium manganese oxide pneumatic conveying

2、Advantages of Lithium manganese oxide pneumatic conveying principle

Lithium manganese oxide pneumatic conveyingthe principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，by forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.。

Lithium manganese oxide pneumatic conveying

3、Lithium manganese oxide pneumatic conveying structure

The Lithium manganese oxide pneumatic conveying structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Lithium manganese oxide pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. control system

The control system is the "brain" of the Lithium manganese oxide pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Lithium manganese oxide pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. control system

The control system is the "brain" of the Lithium manganese oxide pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Lithium manganese oxide pneumatic conveying

4、Lithium manganese oxide pneumatic conveying characteristics

Lithium manganese oxide pneumatic conveyingHigh degree of automation,Strong adaptability,Economic and environmental protection,convenient to use,Long conveying distance。

Lithium manganese oxide pneumatic conveying

5、Lithium manganese oxide pneumatic conveying working site

Speak directly with facts on the spot。

Lithium manganese oxide pneumatic conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a kind of high quality and low price Lithium manganese oxide pneumatic conveying。

6、hyde workshop real shot

Speak directly with facts on the spot。

Lithium manganese oxide pneumatic conveying

As you can see from the live video.hyde powder at the start of the operation,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.。

Lithium manganese oxide pneumatic conveyingNot only can the materials from multiple feeding points be transported to the unloading point in turn, but also the materials from multiple feeding points can be transported to the unloading point at the same time, and remote operation can be realized.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as smash.、Large conveying capacity, long conveying distance and high conveying quality.、Not only can the materials from multiple feeding points be transported to the unloading point in turn, but also the materials from multiple feeding points can be transported to the unloading point at the same time, and remote operation can be realized.、The conveying system is closed.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.，the main features are automation, Quantitative transportation, Efficient and flexible, System modularization and Can reduce the labor intensity，Widely used inBulk material transportation,material handling,Environmental protection and cleaner production,Reduce pollution,Multi-point transportation and so on。