What is a Pneumatic conveying of polytetrafluoroethylene? Introduction to the principle of pneumatic conveying system structure

Pneumatic conveying of polytetrafluoroethyleneis a kind of material conveying equipment which combines jet technology and fluidization technology.。

1、Brief introduction of Pneumatic conveying of polytetrafluoroethylene

Pneumatic conveying of polytetrafluoroethyleneis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.。

Pneumatic conveying of polytetrafluoroethylene

2、Pneumatic conveying of polytetrafluoroethylene structure

The Pneumatic conveying of polytetrafluoroethylene structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Air source device

The air source device is the power core of the Pneumatic conveying of polytetrafluoroethylene system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of polytetrafluoroethylene system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Pneumatic conveying of polytetrafluoroethylene

3、Pneumatic conveying of polytetrafluoroethylene performance advantage

The advantages of Pneumatic conveying of polytetrafluoroethylene are as follows:

1. be simple in structure

Pneumatic conveying of polytetrafluoroethylene has simple structure and convenient operation.

2. Flexible layout

The pipeline layout of the Pneumatic conveying of polytetrafluoroethylene is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Pneumatic conveying of polytetrafluoroethylene system to adapt to various complex production environments and meet different production needs.

3. versatility

While conveying materials, the Pneumatic conveying of polytetrafluoroethylene system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling and so on. This versatility makes the Pneumatic conveying of polytetrafluoroethylene more flexible and adaptable in the production process.

4. Save space

Pneumatic conveying of polytetrafluoroethylene equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

5. Improve conveying efficiency

The Pneumatic conveying of polytetrafluoroethylene can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

Pneumatic conveying of polytetrafluoroethylene

4、Pneumatic conveying of polytetrafluoroethylene application

Pneumatic conveying of polytetrafluoroethylenes have the following purposes.

1. material handling

Pneumatic conveying of polytetrafluoroethylene system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Bulk material transportation

The Pneumatic conveying of polytetrafluoroethylene is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Pneumatic conveying of polytetrafluoroethylene, these materials can be efficiently transferred between different production links or equipment.

3. Reduce pollution

The Pneumatic conveying of polytetrafluoroethylene system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. save energy and cut emissions

Although the Pneumatic conveying of polytetrafluoroethylene system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Adapt to complex environment

The Pneumatic conveying of polytetrafluoroethylene system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Pneumatic conveying of polytetrafluoroethylene pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

Pneumatic conveying of polytetrafluoroethylene

5、Pneumatic conveying of polytetrafluoroethylene price

The Pneumatic conveying of polytetrafluoroethylene price is introduced as follows:

1. Brand strength

At present, there are various brands of Pneumatic conveying of polytetrafluoroethylene in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Pneumatic conveying of polytetrafluoroethylene are different.

2. market supply and demand

The market demand has a certain impact on the price of Pneumatic conveying of polytetrafluoroethylene. When there are many customers who need Pneumatic conveying of polytetrafluoroethylene in the market, there will be a phenomenon that demand exceeds supply, and then the price of Pneumatic conveying of polytetrafluoroethylene will become higher. On the contrary, when there are very few customers who need Pneumatic conveying of polytetrafluoroethylene, there will be a phenomenon of oversupply, and the price of Pneumatic conveying of polytetrafluoroethylene will be reduced.

3. product quality

If the quality of the product is guaranteed, its service life will be longer. At the same time, the more perfect the performance, the more economic value can be created for customers, and the price of such products will be higher. hyde powder has strictly controlled the quality and the sales price is also reasonable.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

Pneumatic conveying of polytetrafluoroethylene

6、company profile

hyde, as one of the professional and powerful Pneumatic conveying of polytetrafluoroethylene manufacturers in shandong(Province), produces Pneumatic conveying of polytetrafluoroethylene with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

hyde powder

Pneumatic conveying of polytetrafluoroethyleneis a reliable material conveying equipment for conveying powdery materials under high pressure.，the product looks atmospheric.。