Introduction to Fracturing sand transportation and pneumatic conveying system working principle

Fracturing sand transportationthat is, the technology of conveying granular materials in closed pipes by air flow.，the advantage is The conveying system is closed.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、Materials are transported by closed pipelines.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、The materials collected from several points can be sent to one place or one place to scattered points, and remote operation can be realized.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.，is designed by hyde powder with advanced technology。The following is to introduce the Fracturing sand transportation:

1、Brief introduction of Fracturing sand transportation

Fracturing sand transportationis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.。

Fracturing sand transportation

2、Fracturing sand transportation application

Fracturing sand transportations have the following purposes.

1. Adapt to complex environment

The Fracturing sand transportation system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Fracturing sand transportation pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

2. Multi-point transportation

The Fracturing sand transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. save energy and cut emissions

Although the Fracturing sand transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Reduce pollution

The Fracturing sand transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. material handling

Fracturing sand transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Fracturing sand transportation

3、Working principle of Fracturing sand transportation

Fracturing sand transportationat work,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，it can be used in chemical plant, heat-engine plant, cast, transportation, medicine and other industries，the main features are Convenient maintenance, Reduce material loss, Fast conveying speed, Easy maintenance and High production efficiency，the product looks beautiful.，Can be transported from one point to one place or from one point to many points.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.、Not only can the materials from multiple feeding points be transported to the unloading point in turn, but also the materials from multiple feeding points can be transported to the unloading point at the same time, and remote operation can be realized.、The whole conveying process is sealed.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.。

Fracturing sand transportation

4、Structural advantages of Fracturing sand transportation

The Fracturing sand transportation has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Fracturing sand transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. control system

The control system is the "brain" of the Fracturing sand transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Fracturing sand transportation

5、Fracturing sand transportation explanation video

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Fracturing sand transportationt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Fracturing sand transportation

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a material conveying system that combines jet technology and fluidization technology.。

6、Brief introduction of hyde powder

Shandong Haide Fenti Engineering Co., Ltd., located in shandong(Province), is a large Fracturing sand transportation manufacturer. The Fracturing sand transportation produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

hyde

Fracturing sand transportationfeatures include Convenient maintenance, Centralized transportation, High degree of automation, No secondary pollution and Efficient and flexible，multifunctional, with functions such as Automatic control, Explosion-proof involves, Closed conveying, Environmental protection and pollution-free and Automatic control，the advantage is Large conveying capacity, long conveying distance and high conveying quality.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、Materials are transported in a closed pipeline.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、Closed pipeline transportation，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.。