Introduction to Scattered sand transportation, advantages, characteristics and principles of Material conveying

Scattered sand transportationis a kind of technology integrated material conveying equipment which uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，Commonly used inReduce pollution,Environmental protection and cleaner production,Bulk material transportation,Mixing and classification,Heating, cooling and drying and so on，it is an ideal choice for customers to buy Scattered sand transportation。The following is to introduce the Scattered sand transportation:

1、Brief introduction of Scattered sand transportation

Scattered sand transportationis a material conveying system that combines jet technology and fluidization technology.，at the start of the operation,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，the product looks beautiful.。

Scattered sand transportation

2、Scattered sand transportation field real shot

On-site aerial photography of Scattered sand transportation。

Scattered sand transportation

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a conveying system that uses airflow to convey powder and granular materials.。

3、Scattered sand transportation structure composition

The Scattered sand transportation has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Air source device

The air source device is the power core of the Scattered sand transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Scattered sand transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Scattered sand transportation

4、Introduction of advantages of Scattered sand transportation

Scattered sand transportations have the following advantages.

1. Multi-point to multi-point transportation

The Scattered sand transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. Low maintenance cost

The Scattered sand transportation system has less wear parts, lower maintenance cost and higher reliability, which reduces the risk of production interruption.

3. Material quality protection

In the process of conveying, the Scattered sand transportation can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

4. High conveying efficiency and low cost.

The Scattered sand transportation system can transport materials continuously and stably, and the transportation speed is fast, which greatly improves the production efficiency and transportation capacity. Compared with other transportation modes, such as mechanical transportation or manual handling, Scattered sand transportations can significantly reduce the stagnation time of materials in the transportation process and speed up the production process.

5. Generality

The Scattered sand transportation system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Scattered sand transportations widely used in many industries.

Scattered sand transportation

5、Introduction of Scattered sand transportation characteristics

Scattered sand transportationit has the characteristics of convenient to use, Flexible layout, System modularization, Can reduce the labor intensity and energy saving and environmental protection。

Scattered sand transportation

6、How much is the Scattered sand transportation?

The Scattered sand transportation price is introduced as follows:

1. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

2. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

3. sales mode

hyde Scattered sand transportation manufacturer is a large Scattered sand transportation manufacturer which mainly produces Scattered sand transportation, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Scattered sand transportation price is also low.

4. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Scattered sand transportation manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Scattered sand transportation price can meet the purchasing needs of customers.

5. regional difference

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

Scattered sand transportation

Scattered sand transportationit has the functions of Closed conveying, Explosion-proof involves, material handling, Environmental protection and pollution-free and Physical processing assistance，In the conveying process, various technological operations can be carried out at the same time.、High conveying speed, good conveying quality and high conveying efficiency.、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.、Can realize the transportation of materials in a closed pipeline.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.，Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.。