Introduction to Gypsum pneumatic conveying, Pneumatic conveying equipment specifications, model parameters

Gypsum pneumatic conveyingis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.。

1、Brief introduction of Gypsum pneumatic conveying

Gypsum pneumatic conveyingIt uses air energy to continuously convey powder and bulk materials.，it has been widely used in pharmaceutical factory, power, cast, metallurgy, heat-engine plant and other industries，is a common Gypsum pneumatic conveying，in the course of work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，has been favored by more and more customers.。

Gypsum pneumatic conveying

2、Gypsum pneumatic conveying function

Gypsum pneumatic conveyingit has the functions of Explosion-proof involves, Environmental protection and pollution-free, Physical processing assistance, material handling and Automatic control，is a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，is a kind of high quality and low price Gypsum pneumatic conveying，it is an ideal choice for customers to buy Gypsum pneumatic conveying。

Gypsum pneumatic conveying

3、Gypsum pneumatic conveying application

Gypsum pneumatic conveyings have the following purposes.

1. Long-distance and multipoint transportation

The Gypsum pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Gypsum pneumatic conveyings have important application value in large factories and cross-regional material transportation.

2. save energy and cut emissions

Although the Gypsum pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. cut down on energy consumption

Although the power consumption of the Gypsum pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Mixing and classification

In the process of conveying, the Gypsum pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. Process assistance

In some production processes, Gypsum pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Gypsum pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Gypsum pneumatic conveying

4、Gypsum pneumatic conveying characteristics

Gypsum pneumatic conveyingfeatures include Convenient operation and management, Easy maintenance, convenient to use, omniseal and High system reliability，widely used inpharmaceutical factory,building materials,metallurgy,heat-engine plant,building material and other industries，is a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，is developed and improved by hyde。

Gypsum pneumatic conveying

5、Structural characteristics of Gypsum pneumatic conveying

The Gypsum pneumatic conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Gypsum pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Gypsum pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Gypsum pneumatic conveying

6、Gypsum pneumatic conveying structure

The Gypsum pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the Gypsum pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Gypsum pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Gypsum pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Gypsum pneumatic conveying

Gypsum pneumatic conveyingthe product looks beautiful.，it is widely used in machine building, environmental protection, plastic, environmental protection, medicine and other industries。