Introduction to Transportation of ternary materials, advantages, characteristics and principles of pneumatic conveying system

Transportation of ternary materialsthat is, the technology of conveying granular materials in closed pipes by air flow.，support customization。The following is to introduce the Transportation of ternary materials:

1、Brief introduction of Transportation of ternary materials

Transportation of ternary materialsit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.。

Transportation of ternary materials

2、Structural characteristics of Transportation of ternary materials

The Transportation of ternary materials has the following structure

1. control system

The control system is the "brain" of the Transportation of ternary materials system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Transportation of ternary materials system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Air source device

The air source device is the power core of the Transportation of ternary materials system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Transportation of ternary materials

3、Introduction of Transportation of ternary materials characteristics

Transportation of ternary materialsit has the characteristics of The conveying speed is faster, Low energy consumption, Simple operation, Safe and reliable and Easy to automate management，The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.、Can be transported from one point to one place or from one point to many points.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as cool.、Closed pipeline transportation，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.，it has the functions of Automatic control, Physical processing assistance, Explosion-proof involves, Closed conveying and Environmental protection and pollution-free，is a Transportation of ternary materials，Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、The material is completely closed in the whole conveying process.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、It can be discharged at a single point or at multiple points.。

Transportation of ternary materials

4、Transportation of ternary materials function

Transportation of ternary materialsit has the functions of Automatic control, Environmental protection and pollution-free, material handling, Closed conveying and Physical processing assistance，the product looks beautiful.，the advantage is Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as be broken.、Multi-point feeding and multi-point discharging are possible.、The conveying system is closed.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation，It is mostly used in Dust removal and essence, material handling, Bulk material transportation, Mixing and classification, Reduce pollution, Long-distance and multipoint transportation and so on，Cheap and high quality。

Transportation of ternary materials

5、Transportation of ternary materials use

The purpose of Transportation of ternary materials is introduced as follows:

1. save energy and cut emissions

Although the Transportation of ternary materials system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Environmental protection and cleaner production

The Transportation of ternary materials process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

3. Bulk material transportation

The Transportation of ternary materials is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Transportation of ternary materials, these materials can be efficiently transferred between different production links or equipment.

4. Long-distance and multipoint transportation

The Transportation of ternary materials system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Transportation of ternary materialss have important application value in large factories and cross-regional material transportation.

5. Dust removal and purification

The Transportation of ternary materials system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Transportation of ternary materials

6、Transportation of ternary materials quotation

The Transportation of ternary materials price is introduced as follows:

1. Model size

There are several specifications and models of Transportation of ternary materials, and the specific price varies with different configurations. In addition, according to different customer needs, it is necessary to configure suitable Transportation of ternary materials, and the budget and other requirements recommend suitable Transportation of ternary materials for everyone.

2. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

3. market supply and demand

Some external factors, such as market conditions, economic situation, industry rules, supply-demand relationship, etc., will also lead to certain fluctuations in Transportation of ternary materials prices, so this is also the main factor affecting prices.

4. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Transportation of ternary materials have more or less differences in price.

5. Product configuration difference

Usually, the quotation of Transportation of ternary materials changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

Transportation of ternary materials

Transportation of ternary materialsit is widely used in chemical plant, power, chemical plant, plastic and machine building，The overall structural design is simple and novel.，it is mainly composed of dust pelletizing system, Bunker system, Air source system, Conveying pipeline system and delivery system，the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。