What is a Positive electrode material transportation? Introduction to the principle of pneumatic conveying structure

Positive electrode material transportationis a kind of technology integrated material conveying equipment which uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，Efficient and flexible,Convenient maintenance,System modularization,Convenient operation and management,High system reliability，It can be used for Dust removal and essence, Reduce pollution, Long-distance and multipoint transportation, cut down on energy consumption, Long distance transportation, Bulk material transportation and so on，it is an ideal choice for customers to buy Positive electrode material transportation。

1、Brief introduction of Positive electrode material transportation

Positive electrode material transportationis a material conveying device that uses the pressure of gas to convey powder materials.，can be customized according to user's needs.。

Positive electrode material transportation

2、Positive electrode material transportation use

The purpose of Positive electrode material transportation is introduced as follows:

1. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Positive electrode material transportation pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

2. Reduce pollution

The Positive electrode material transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. cut down on energy consumption

Although the power consumption of the Positive electrode material transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. material handling

Positive electrode material transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Environmental protection and cleaner production

The Positive electrode material transportation process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

Positive electrode material transportation

3、Structural characteristics of Positive electrode material transportation

The Positive electrode material transportation structure is introduced as follows:

1. Air source device

The air source device is the power core of the Positive electrode material transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Positive electrode material transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Air source device

The air source device is the power core of the Positive electrode material transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Positive electrode material transportation

4、Video analysis of Positive electrode material transportation

Speak directly with facts on the spot。

Positive electrode material transportation

As you can see from the live video.，hyde powder it is mainly composed of Conveying pipeline system, dust pelletizing system, Bunker system, control system and Conveying pipeline system。

5、Positive electrode material transportation function

Positive electrode material transportationmultifunctional, with functions such as material handling, Explosion-proof involves, Environmental protection and pollution-free, Automatic control and Physical processing assistance。

Positive electrode material transportation

6、Company preferential activities

Positive electrode material transportation is a new type of pneumatic conveying introduced by hyde manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for chemical plant and other industries. Now consult hyde powderPositive electrode material transportation, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

hyde

Positive electrode material transportationMulti-point feeding and multi-point discharging are possible.、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.、The whole conveying process is sealed.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as grade.，multifunctional, with functions such as Environmental protection and pollution-free, Physical processing assistance, Closed conveying, Automatic control and Explosion-proof involves。