Introduction to Paint pneumatic conveying and pneumatic conveying structure principle

Paint pneumatic conveyingis a material conveying device that uses the pressure of gas to convey powder materials.。

1、Brief introduction of Paint pneumatic conveying

Paint pneumatic conveyingis an efficient and environment-friendly way to transport materials by using the energy of airflow.，it is widely used in grain processing, environmental protection, building materials, transportation and machine building，the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as grade.、PLC intelligent control, high degree of automation and simple operation.、In the conveying process, various technological operations can be carried out at the same time.、The conveying system is closed.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.，it is an ideal choice for customers to buy Paint pneumatic conveying。

Paint pneumatic conveying

2、Paint pneumatic conveying field real shot

High-definition pictures for various Paint pneumatic conveying, panoramic display,the product looks atmospheric., reliable in quality and trustworthy.。

Paint pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Functional advantages of Paint pneumatic conveying

Paint pneumatic conveyings have the following advantages.

1. High conveying efficiency and low cost.

The Paint pneumatic conveying system uses gas to convey materials, which has high conveying speed and capacity and can realize continuous and efficient transportation.

2. Multi-point to multi-point transportation

The Paint pneumatic conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. Small floor space

Compared with the traditional mechanical conveying mode, the Paint pneumatic conveying system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

4. High degree of automation

Modern Paint pneumatic conveying systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

5. Material quality protection

In the process of conveying, the Paint pneumatic conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

Paint pneumatic conveying

4、Structural characteristics of Paint pneumatic conveying

The Paint pneumatic conveying has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. control system

The control system is the "brain" of the Paint pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. control system

The control system is the "brain" of the Paint pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Paint pneumatic conveying

5、Paint pneumatic conveying application

Paint pneumatic conveyings have the following purposes.

1. save energy and cut emissions

Although the Paint pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. material handling

Paint pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Dust removal and purification

The Paint pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. Long distance transportation

The Paint pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

5. Multi-point transportation

The Paint pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Paint pneumatic conveying

6、How much is the Paint pneumatic conveying?

The Paint pneumatic conveying price is introduced as follows:

1. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

2. quality

If the quality of the product is guaranteed, its service life will be longer. At the same time, the more perfect the performance, the more economic value can be created for customers, and the price of such products will be higher. hyde powder has strictly controlled the quality and the sales price is also reasonable.

3. specifications and models

Customer needs are different, so the required product models will be different. Different product models and different performances will naturally lead to different Paint pneumatic conveying prices.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. market demand

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of Paint pneumatic conveying will fluctuate greatly, and the market changes are various.

Paint pneumatic conveying

Paint pneumatic conveyingmultifunctional, with functions such as Closed conveying, Physical processing assistance, Automatic control, Automatic control and Closed conveying，it is usually composed of delivery system, Bunker system, dust pelletizing system, control system and Air source system，This productThe overall structural design is simple, diverse and beautiful.。