What is a Denitrification agent pneumatic conveying? Introduction to the principle of Material conveying structure

Denitrification agent pneumatic conveyingis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，the main features are automation, be of simple construction, convenient to use, energy saving and environmental protection and Reduce material loss，in the course of work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，the product looks beautiful.，was developed and designed by hyde powder。

1、Brief introduction of Denitrification agent pneumatic conveying

Denitrification agent pneumatic conveyingis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，Remote operation can be carried out from several points to one place or from one place to several points.、In the process of conveying, various technological operations can be carried out at the same time, such as smash.、Closed pipeline transportation，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、The whole conveying process is sealed.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the conveying process, various technological operations can be carried out at the same time.，Widely used in Reduce pollution, Environmental protection and cleaner production, Process assistance, Mixing and classification and material handling，it is an ideal choice for customers to buy Denitrification agent pneumatic conveying。

Denitrification agent pneumatic conveying

2、Denitrification agent pneumatic conveying HD picture

The styles and designs of Denitrification agent pneumatic conveying are diverse, and the specifications and models can be tailored according to users' needs, providing high-definition drawings for our customers' reference.。

Denitrification agent pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Structural characteristics of Denitrification agent pneumatic conveying

The Denitrification agent pneumatic conveying has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Air source device

The air source device is the power core of the Denitrification agent pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. control system

The control system is the "brain" of the Denitrification agent pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Denitrification agent pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Denitrification agent pneumatic conveying

4、Denitrification agent pneumatic conveying application

Denitrification agent pneumatic conveyings have the following purposes.

1. Dust removal and purification

The Denitrification agent pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

2. save energy and cut emissions

Although the Denitrification agent pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. cut down on energy consumption

Although the power consumption of the Denitrification agent pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Adapt to complex environment

The Denitrification agent pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Denitrification agent pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. material handling

Denitrification agent pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Denitrification agent pneumatic conveying

5、How much is the Denitrification agent pneumatic conveying?

The Denitrification agent pneumatic conveying price is introduced as follows:

1. type of operation

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

2. Brand strength

At present, there are various brands of Denitrification agent pneumatic conveying in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Denitrification agent pneumatic conveying are different.

3. Manufacturer scale

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. hyde's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

4. specifications and models

Different product models will also affect the price changes. Different specifications and models will lead to different product prices.

5. raw material

The quality of material selection is one of the main factors that directly affect the Denitrification agent pneumatic conveying. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

Denitrification agent pneumatic conveying

6、hyde powder delivery site

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Denitrification agent pneumatic conveying

As you can see from the live video.hyde powder the product looks atmospheric.。

Denitrification agent pneumatic conveyingUsing the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，It can be sent from several points to one place in a centralized way, or from one place to several points in a decentralized way for long-distance operation.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、The conveying system is closed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as cool.，It is mostly used in Long distance transportation, Bulk material transportation, cut down on energy consumption, Dust removal and essence, Multi-point transportation, Heating, cooling and drying and so on。