Introduction to Central feeding equipment, how much is the price of the Pneumatic conveying equipment?

Central feeding equipmentby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.，it is an ideal choice for customers to buy Central feeding equipment。

1、Brief introduction of Central feeding equipment

Central feeding equipmentis a method of conveying materials through pipelines by using air flow with a certain speed.，the advantage is In the conveying process, various technological operations can be carried out at the same time.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、Can realize the transportation of materials in a closed pipeline.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、High conveying speed, good conveying quality and high conveying efficiency.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.，customizable。

Central feeding equipment

2、Introduction of advantages of Central feeding equipment

Central feeding equipments have the following advantages.

1. Various process operations can be realized.

In the process of conveying, the Central feeding equipment system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

2. Generality

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Central feeding equipment.

3. Multi-point to multi-point transportation

The Central feeding equipment system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. High degree of automation

Modern Central feeding equipment systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

5. Save space

Compared with the traditional mechanical conveying mode, the Central feeding equipment system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

Central feeding equipment

3、Central feeding equipment application

Central feeding equipments have the following purposes.

1. cut down on energy consumption

Although the power consumption of the Central feeding equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

2. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Central feeding equipment pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

3. Long distance transportation

The Central feeding equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

4. Environmental protection and cleaner production

The Central feeding equipment process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. save energy and cut emissions

Although the Central feeding equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Central feeding equipment

4、Video analysis of Central feeding equipment

The following is the live video of Central feeding equipment designed and produced by hyde powder for users, from which we can see the Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、Can be fed from one place to many places for decentralized transportation.、The conveying system is closed.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.、Fully enclosed transportation system, materials are transported in closed pipes.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation. of Central feeding equipment.。

Central feeding equipment

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. Mainly used forLong distance transportation,Heating, cooling and drying,Environmental protection and cleaner production,cut down on energy consumption andLong-distance and multipoint transportation。

5、Central feeding equipment work site real shot

Haide Central feeding equipment manufacturing factory。

Central feeding equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

Central feeding equipmentwidely used in grain processing, logistics, machine building, cast, grain processing and other fields，is a reliable material conveying equipment for conveying powdery materials under high pressure.。