Introduction to Pneumatic conveying in printing and dyeing factories and Material conveying working principle

Pneumatic conveying in printing and dyeing factoriesis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，be loved by our customers.。

1、Brief introduction of Pneumatic conveying in printing and dyeing factories

Pneumatic conveying in printing and dyeing factoriesis a technology to transport solid particulate materials through air flow.，it has the functions of Physical processing assistance, material handling, Environmental protection and pollution-free, Automatic control and Explosion-proof involves。

Pneumatic conveying in printing and dyeing factories

2、Introduction of advantages of Pneumatic conveying in printing and dyeing factories

The advantages of Pneumatic conveying in printing and dyeing factories are as follows:

1. Small floor space

Compared with other transportation modes, the Pneumatic conveying in printing and dyeing factories system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

2. Structural construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

3. Environmental protection and pollution-free

The Pneumatic conveying in printing and dyeing factories system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

4. Strong adaptability

The Pneumatic conveying in printing and dyeing factories system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

5. High conveying efficiency

Can transport materials quickly and in large quantities.

Pneumatic conveying in printing and dyeing factories

3、Pneumatic conveying in printing and dyeing factories use

The purpose of Pneumatic conveying in printing and dyeing factories is introduced as follows:

1. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Pneumatic conveying in printing and dyeing factories pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

2. Adapt to complex environment

The Pneumatic conveying in printing and dyeing factories system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Pneumatic conveying in printing and dyeing factories pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

3. Bulk material transportation

The Pneumatic conveying in printing and dyeing factories is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Pneumatic conveying in printing and dyeing factories, these materials can be efficiently transferred between different production links or equipment.

4. Process assistance

In some production processes, Pneumatic conveying in printing and dyeing factoriess are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Pneumatic conveying in printing and dyeing factories system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

5. cut down on energy consumption

Although the power consumption of the Pneumatic conveying in printing and dyeing factories is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Pneumatic conveying in printing and dyeing factories

4、Introduction of Pneumatic conveying in printing and dyeing factories characteristics

Pneumatic conveying in printing and dyeing factoriesit has the characteristics of Low energy consumption, Simple system, Flexible pipeline layout, versatility and Wide range of conveying materials，is a common Pneumatic conveying in printing and dyeing factories，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，is an advanced Pneumatic conveying in printing and dyeing factories developed by our company in combination with the actual situation of the industry。

Pneumatic conveying in printing and dyeing factories

5、Working principle of Pneumatic conveying in printing and dyeing factories

Pneumatic conveying in printing and dyeing factoriesat runtime,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，multifunctional, with functions such as Environmental protection and pollution-free, Physical processing assistance, Automatic control, Closed conveying and material handling。

Pneumatic conveying in printing and dyeing factories

6、Pneumatic conveying in printing and dyeing factories price advantage

The Pneumatic conveying in printing and dyeing factories price is introduced as follows:

1. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

2. Product configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. hyde pays special attention to the hardware configuration of products, so hyde powder Pneumatic conveying in printing and dyeing factories has a higher cost performance.

3. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. deploy

The difference in Pneumatic conveying in printing and dyeing factories configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

5. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

Pneumatic conveying in printing and dyeing factories

Pneumatic conveying in printing and dyeing factoriesReduce material loss,easy installation,Save manpower,The conveying speed is faster,omniseal，Commonly used incut down on energy consumption,Multi-point transportation,Long distance transportation,Dust removal and essence,Process assistance and so on。