What is a Boiler fly ash pneumatic conveying? Introduction to the advantages and characteristics of the pneumatic conveying system

Boiler fly ash pneumatic conveyingis a conveying system that uses airflow to convey powder and granular materials.。

1、Brief introduction of Boiler fly ash pneumatic conveying

Boiler fly ash pneumatic conveyingis to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，it has the characteristics of Strong adaptability, Operation safety, Easy to realize automation, Easy to automate management and Flexible pipeline layout，The pipeline layout is flexible, and it can be arranged according to the specific terrain.、Can realize the transportation of materials in a closed pipeline.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、It is suitable for centralized transportation from many places to one place, with one or several feeding points, and realizes long-distance operation.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、Materials are transported in a closed pipeline.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.，multifunctional, with functions such as material handling, Closed conveying, Automatic control, Explosion-proof involves and Environmental protection and pollution-free，widely used inbuilding material,machine building,chemical industry,build a ship,power and other industries。

Boiler fly ash pneumatic conveying

2、Boiler fly ash pneumatic conveying function

Boiler fly ash pneumatic conveyingmultifunctional, with functions such as material handling, Physical processing assistance, Closed conveying, Environmental protection and pollution-free and Explosion-proof involves，at the start of the operation,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.。

Boiler fly ash pneumatic conveying

3、Structural advantages of Boiler fly ash pneumatic conveying

The Boiler fly ash pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the Boiler fly ash pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Air source device

The air source device is the power core of the Boiler fly ash pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Boiler fly ash pneumatic conveying

4、Boiler fly ash pneumatic conveying use

The purpose of Boiler fly ash pneumatic conveying is introduced as follows:

1. Long distance transportation

The Boiler fly ash pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. Mixing and classification

In the process of conveying, the Boiler fly ash pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

3. Multi-point transportation

The Boiler fly ash pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. Environmental protection and cleaner production

The Boiler fly ash pneumatic conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. cut down on energy consumption

Although the power consumption of the Boiler fly ash pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Boiler fly ash pneumatic conveying

5、Boiler fly ash pneumatic conveying video

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Boiler fly ash pneumatic conveying production process and production site, and gain favorable comments and recognition from customers.。

Boiler fly ash pneumatic conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the product looks beautiful.。

6、hyde's strength

The company has many years of Boiler fly ash pneumatic conveying manufacturing experience, large scale and strong strength.。

hyde powder

Boiler fly ash pneumatic conveyingin the course of work,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，the advantage is Multi-point feeding and multi-point discharging are possible.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.、The operation mode is flexible and changeable, and it can run continuously or regularly.、It can feed from one place to many places for decentralized transportation and realize long-distance operation.、The material is completely closed in the whole conveying process.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.，The overall structural design is simple, diverse and beautiful.，it is mainly composed of delivery system, Bunker system, dust pelletizing system, Air source system and Bunker system。