Introduction to Pneumatic dust removal, how much is the price of the Powder conveying?

Pneumatic dust removalis a kind of technology integrated material conveying equipment which uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.。

1、Brief introduction of Pneumatic dust removal

Pneumatic dust removalis a reliable material conveying equipment for conveying powdery materials under high pressure.，It is a product series that integrates Process assistance, Mixing and classification, Dust removal and essence, material handling and Bulk material transportation，it is an ideal choice for customers to buy Pneumatic dust removal。

Pneumatic dust removal

2、Structural characteristics of Pneumatic dust removal

The Pneumatic dust removal structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. control system

The control system is the "brain" of the Pneumatic dust removal system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Pneumatic dust removal system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Air source device

The air source device is the power core of the Pneumatic dust removal system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Pneumatic dust removal

3、Pneumatic dust removal performance advantage

Pneumatic dust removals have the following advantages.

1. Low maintenance cost

The Pneumatic dust removal system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

2. Totally enclosed conveying

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

3. Save space

Pneumatic dust removal equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. Convenient maintenance and easy automation.

The Pneumatic dust removal system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

5. High degree of automation

The Pneumatic dust removal system is easy to realize automatic control and can be operated through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

Pneumatic dust removal

4、Introduction of Pneumatic dust removal characteristics

Pneumatic dust removalthe main features are automation, Flexible pipeline layout, Wide range of conveying materials, The failure rate is low and High production efficiency，the advantage is High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.、PLC intelligent control, high degree of automation and simple operation.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、The conveying system is closed.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.，is a kind of Pneumatic dust removal manufactured by hyde powder。

Pneumatic dust removal

5、Pneumatic dust removal work site real shot

The Pneumatic dust removal has been upgraded, and the beauty of details is appreciated.。

Pneumatic dust removal

Note: All the pictures in this article were taken by hyde manufacturer.。

Pneumatic dust removalmultifunctional, with functions such as Automatic control, material handling, Environmental protection and pollution-free, Physical processing assistance and Explosion-proof involves，It can be used for cut down on energy consumption, Environmental protection and cleaner production, Multi-point transportation, Long distance transportation, Long-distance and multipoint transportation, Reduce pollution and so on。