Introduction to Material conveying system, Pneumatic conveying equipment advantages, characteristics and principles

Material conveying systemis an advanced technology for conveying materials by aerodynamic force.，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，The overall structural design is relatively simple and compact.，it is mainly composed of control system, Bunker system, delivery system, Air source system and Bunker system，the product looks atmospheric.，usually used in transportation, metallurgy, chemical industry, medicine, building materials and other fields。

1、Brief introduction of Material conveying system

Material conveying systemit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.，it has the characteristics of Reduce material loss, Simple system, Flexible pipeline layout, The failure rate is low and High conveying efficiency，The materials are completely sealed during transportation.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、Can be transported from point to point or from point to point, and realize long-distance operation.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、Fully enclosed transportation system, materials are transported in closed pipes.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.。

Material conveying system

2、Material conveying system application

Material conveying systems have the following purposes.

1. Long distance transportation

The Material conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. material handling

Material conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Process assistance

In some production processes, Material conveying systems are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Material conveying system system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

4. Long-distance and multipoint transportation

The Material conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Material conveying systems have important application value in large factories and cross-regional material transportation.

5. save energy and cut emissions

Although the Material conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Material conveying system

3、Material conveying system performance advantage

The advantages of Material conveying system are as follows:

1. Wide application range

The Material conveying system system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

2. structure

Material conveying system has simple structure and convenient operation.

3. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Material conveying system occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

4. Various process operations can be realized.

In the process of conveying, the Material conveying system system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

5. Strong sealing

The Material conveying system is carried out in a closed pipeline, which effectively prevents dust from flying and escaping. This fully enclosed transportation mode not only improves the working environment, reduces the risk of occupational diseases, but also reduces environmental pollution, and meets the requirements of modern enterprises for environmental protection.

Material conveying system

4、Material conveying system HD real shot

On-site aerial photography of Material conveying system。

Material conveying system

As you can see from the live video.，hyde the principle is simple.Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.。

5、Material conveying system application

Material conveying systems have the following purposes.

1. Reduce pollution

The Material conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Bulk material transportation

The Material conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Material conveying system, these materials can be efficiently transferred between different production links or equipment.

3. Environmental protection and cleaner production

The Material conveying system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

4. Mixing and classification

In the process of conveying, the Material conveying system system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. cut down on energy consumption

Although the power consumption of the Material conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Material conveying system

Material conveying systemthe main features are It is convenient to realize mechanization, automation, Stable operation, versatility and Avoid material pollution，multifunctional, with functions such as material handling, Automatic control, Explosion-proof involves, Closed conveying and Physical processing assistance。