Introduction to Small particle pneumatic conveying equipment and Powder pneumatic conveying advantages and features

Small particle pneumatic conveying equipmentthat is, the technology of conveying granular materials in closed pipes by air flow.，has been favored by more and more customers.。The following is to introduce the Small particle pneumatic conveying equipment:

1、Brief introduction of Small particle pneumatic conveying equipment

Small particle pneumatic conveying equipmentmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.，Structure consists of Conveying pipeline system, Bunker system, dust pelletizing system, Air source system, dust pelletizing system and so on，Small particle pneumatic conveying equipmentThe structural design is simple, novel and special.，Commonly used inLong distance transportation,Heating, cooling and drying,material handling,cut down on energy consumption,Process assistance and so on，the product looks beautiful.，it has the functions of Explosion-proof involves, Environmental protection and pollution-free, Closed conveying, Physical processing assistance and Explosion-proof involves。

Small particle pneumatic conveying equipment

2、Small particle pneumatic conveying equipment use

The purpose of Small particle pneumatic conveying equipment is introduced as follows:

1. Dust removal and purification

The Small particle pneumatic conveying equipment system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

2. Long distance transportation

The Small particle pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. cut down on energy consumption

Although the power consumption of the Small particle pneumatic conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Bulk material transportation

The Small particle pneumatic conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Small particle pneumatic conveying equipment, these materials can be efficiently transferred between different production links or equipment.

5. save energy and cut emissions

Although the Small particle pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Small particle pneumatic conveying equipment

3、Small particle pneumatic conveying equipment real beat

There are many specifications and models of Small particle pneumatic conveying equipment, which can be selected by users at will. The high-definition factory map is available for our customers to visit.。

Small particle pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Small particle pneumatic conveying equipment structure composition

The Small particle pneumatic conveying equipment structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Small particle pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the Small particle pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Small particle pneumatic conveying equipment

5、How much is the Small particle pneumatic conveying equipment?

The Small particle pneumatic conveying equipment price is introduced as follows:

1. Brand strength

At present, there are various brands of Small particle pneumatic conveying equipment in shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Small particle pneumatic conveying equipment are different.

2. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Small particle pneumatic conveying equipment manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Small particle pneumatic conveying equipment price can meet the purchasing needs of customers.

3. deploy

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Small particle pneumatic conveying equipment, which is beyond doubt. hyde makes every product with great care in the attitude of being highly responsible to customers, so the price of hyde powder Small particle pneumatic conveying equipment is reasonable for products with the same configuration.

4. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

5. sales mode

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

Small particle pneumatic conveying equipment

6、hyde workshop picture real shot

The finished products of the Small particle pneumatic conveying equipment factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde powder

The finished products of the Small particle pneumatic conveying equipment factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Small particle pneumatic conveying equipmentThe structural design is more advanced and reasonable.，it is mainly composed of delivery system, Bunker system, Conveying pipeline system, control system and dust pelletizing system，High conveying speed, good conveying quality and high conveying efficiency.、In the conveying process, various technological operations can be carried out at the same time.、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、Materials are transported by closed pipelines.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation，multifunctional, with functions such as Closed conveying, Automatic control, Environmental protection and pollution-free, material handling and Physical processing assistance。