Introduction to Multi functional conveying system, Powder conveying specifications, model parameters

Multi functional conveying systemis a material conveying device that uses the pressure of gas to convey powder materials.，It can be used for Dust removal and essence, Long-distance and multipoint transportation, material handling, cut down on energy consumption, Mixing and classification, Long-distance and multipoint transportation and so on，the product looks beautiful.。The following is to introduce the Multi functional conveying system:

1、Brief introduction of Multi functional conveying system

Multi functional conveying systemis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，be loved by our customers.。

Multi functional conveying system

2、Video analysis of Multi functional conveying system

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Multi functional conveying systemt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Multi functional conveying system

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. Centralized transportation,Convenient operation and management,be of simple construction,Convenient maintenance,Stable operation。

3、Multi functional conveying system structure composition

The Multi functional conveying system structure is introduced as follows:

1. Air source device

The air source device is the power core of the Multi functional conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Multi functional conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Multi functional conveying system

4、Multi functional conveying system characteristics

Multi functional conveying systemit has the characteristics of Efficient and flexible, Convenient maintenance, System modularization, Can carry out long-distance dispersion transportation. and Economic and environmental protection，is a popular Multi functional conveying system，Mainly used forReduce pollution,material handling,Long distance transportation,Process assistance andcut down on energy consumption，In the process of conveying, various technological operations can be carried out at the same time, such as dust.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、Closed pipeline transportation，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、It is suitable for centralized transportation to one place, and the feeding point can be one or several.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dust.，the product looks atmospheric.。

Multi functional conveying system

5、Multi functional conveying system use

The purpose of Multi functional conveying system is introduced as follows:

1. Multi-point transportation

The Multi functional conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. save energy and cut emissions

Although the Multi functional conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Bulk material transportation

The Multi functional conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Multi functional conveying system, these materials can be efficiently transferred between different production links or equipment.

4. cut down on energy consumption

Although the power consumption of the Multi functional conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Adapt to complex environment

The Multi functional conveying system system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Multi functional conveying system pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

Multi functional conveying system

6、How much is the Multi functional conveying system?

The Multi functional conveying system price is introduced as follows:

1. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

2. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. deploy

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. hyde has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

5. market competition

This is one of the external factors that lead to price fluctuation. Only after fully understanding the market can we make a reasonable decision. hyde has a deep understanding of this factor, so the price of our Multi functional conveying system is more reasonable.

Multi functional conveying system

Multi functional conveying systemit is widely used inplastic,metallurgy,environmental protection,grain processing,logistics and other industries，the product looks atmospheric.，Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.。