Introduction to Powder material conveying and pneumatic conveying structure principle

Powder material conveyingis a kind of material conveying equipment which combines jet technology and fluidization technology.，it has the characteristics of be of simple construction, Simple operation, High system reliability, System modularization and Large conveying capacity，reliable quality。

1、Brief introduction of Powder material conveying

Powder material conveyingis a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，it is mainly composed of control system, Conveying pipeline system, delivery system, Conveying pipeline system and control system，productThe structure is novel, special, advanced, reasonable and scientific.，is a common Powder material conveying，Simple structure and advanced technology.，it has the structure of Air source system, dust pelletizing system, delivery system, Bunker system and Conveying pipeline system，support customization。

Powder material conveying

2、Powder material conveying performance advantage

The advantages of Powder material conveying are as follows:

1. Save space

Powder material conveying equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

2. Generality

For materials with unstable chemical properties, the Powder material conveying system can use inert gas for transportation to ensure the stability of the materials during transportation.

3. be of simple construction

Powder material conveying has simple structure and convenient operation.

4. Low maintenance cost

The Powder material conveying system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

5. Generality

The Powder material conveying system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Powder material conveyings widely used in many industries.

Powder material conveying

3、Powder material conveying real shot picture

Take a look at the beautiful pictures of the Powder material conveying, showing the product style.。

Powder material conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Powder material conveying application

Powder material conveyings have the following purposes.

1. save energy and cut emissions

Although the Powder material conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Mixing and classification

In the process of conveying, the Powder material conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Powder material conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. Adapt to complex environment

The Powder material conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Powder material conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. Dust removal and purification

The Powder material conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Powder material conveying

5、Powder material conveying use

The purpose of Powder material conveying is introduced as follows:

1. material handling

Powder material conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Reduce pollution

The Powder material conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. Long-distance and multipoint transportation

The Powder material conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Powder material conveyings have important application value in large factories and cross-regional material transportation.

4. Process assistance

In some production processes, Powder material conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Powder material conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

5. Multi-point transportation

The Powder material conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Powder material conveying

6、Powder material conveying price consultation

The Powder material conveying price is introduced as follows:

1. Reasonable sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

2. geographical position

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

3. Quality advantages and disadvantages

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

4. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Powder material conveying price and service can meet the actual needs of customers.

5. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

Powder material conveying

Powder material conveyingthe main features are Reliable operation, Flexible conveying distance, Easy maintenance, Long conveying distance and Flexible pipeline layout，the advantage is In the conveying process, various technological operations can be carried out at the same time.、Large conveying capacity, long conveying distance and high conveying quality.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、Materials are transported in a closed pipeline.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、It can be discharged at a single point or at multiple points.。