What is a Vehicle mounted mobile pneumatic conveying equipment? Introduction to the advantages and characteristics of the pneumatic conveying system

Vehicle mounted mobile pneumatic conveying equipmentis an advanced technology for conveying materials by aerodynamic force.，It is mostly used in material handling, Dust removal and essence, Heating, cooling and drying, cut down on energy consumption, material handling, Environmental protection and cleaner production and so on，is a popular Vehicle mounted mobile pneumatic conveying equipment，Easy to use,High system reliability,The failure rate is low,Easy to automate management,Flexible pipeline layout，In the conveying process, various technological operations can be carried out at the same time.、Can realize the transportation of materials in a closed pipeline.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、It can be sent from several points to one place in a centralized way, or from one place to several points in a decentralized way for long-distance operation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as dust.。The following is to introduce the Vehicle mounted mobile pneumatic conveying equipment:

1、Brief introduction of Vehicle mounted mobile pneumatic conveying equipment

Vehicle mounted mobile pneumatic conveying equipmentIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，the product looks atmospheric.，is designed by hyde powder with advanced technology。

Vehicle mounted mobile pneumatic conveying equipment

2、Structural characteristics of Vehicle mounted mobile pneumatic conveying equipment

The Vehicle mounted mobile pneumatic conveying equipment structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Air source device

The air source device is the power core of the Vehicle mounted mobile pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. control system

The control system is the "brain" of the Vehicle mounted mobile pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Vehicle mounted mobile pneumatic conveying equipment

3、Introduction of Vehicle mounted mobile pneumatic conveying equipment characteristics

Vehicle mounted mobile pneumatic conveying equipmentfeatures include versatility, Can carry out long-distance dispersion transportation., Convenient maintenance, High degree of automation and Flexible transmission line，at runtime,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，it has been widely used in pharmaceutical factory, building materials, metallurgy, logistics, chemical industry and other industries，it has the functions of Physical processing assistance, Automatic control, Physical processing assistance, Automatic control and Environmental protection and pollution-free，the advantage is Fully enclosed transportation system, materials are transported in closed pipes.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、High conveying speed, good conveying quality and high conveying efficiency.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as cool.。

Vehicle mounted mobile pneumatic conveying equipment

4、Vehicle mounted mobile pneumatic conveying equipment characteristics

Vehicle mounted mobile pneumatic conveying equipmentit has the characteristics of Strong adaptability, Can make full use of space, automation, Various processes and The conveying speed is faster。

Vehicle mounted mobile pneumatic conveying equipment

5、How much is the Vehicle mounted mobile pneumatic conveying equipment?

The Vehicle mounted mobile pneumatic conveying equipment price is introduced as follows:

1. specifications and models

The prices of products with different specifications and models will definitely be different. Generally speaking, the larger the specifications and models, the higher the prices will be. Because the raw materials and time consumed in the manufacturing process of large-sized products are more, the prices are much higher than those of small-sized products.

2. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

3. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Vehicle mounted mobile pneumatic conveying equipment manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Vehicle mounted mobile pneumatic conveying equipment price can meet the purchasing needs of customers.

4. Cost input

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Vehicle mounted mobile pneumatic conveying equipment will also fluctuate to some extent.

5. select a qualified person

The quality of material selection is one of the main factors that directly affect the Vehicle mounted mobile pneumatic conveying equipment. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

Vehicle mounted mobile pneumatic conveying equipment

6、hyde powder delivery site

On-site aerial photography of Vehicle mounted mobile pneumatic conveying equipment。

Vehicle mounted mobile pneumatic conveying equipment

As you can see from the live video.hyde at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

Vehicle mounted mobile pneumatic conveying equipmentthe product looks beautiful.，generally, it is composed of delivery system, Air source system, control system, control system, Air source system and other major components，It has the functions of Long distance transportation, Long-distance and multipoint transportation, Bulk material transportation, Mixing and classification and Reduce pollution。