What is a Vacuum adsorption conveying system? Introduction to the principle of Material conveying structure

Vacuum adsorption conveying systemIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，the main features are Safe and reliable, Easy to use, Simple system, Convenient for material transportation and recovery. and Easy to automate management。

1、Brief introduction of Vacuum adsorption conveying system

Vacuum adsorption conveying systemis a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.。

Vacuum adsorption conveying system

2、Structural characteristics of Vacuum adsorption conveying system

The Vacuum adsorption conveying system has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Air source device

The air source device is the power core of the Vacuum adsorption conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Vacuum adsorption conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Vacuum adsorption conveying system

3、Functional advantages of Vacuum adsorption conveying system

Vacuum adsorption conveying systems have the following advantages.

1. Environmental protection and pollution-free

In the process of Vacuum adsorption conveying system opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

2. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Vacuum adsorption conveying system occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

3. Save space

Vacuum adsorption conveying system equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. Improve conveying efficiency

The Vacuum adsorption conveying system can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

5. Easy to maintain

Although the initial investment of Vacuum adsorption conveying system system may be high, its maintenance cost is relatively low. Because the equipment has simple structure and few moving parts, it is convenient to maintain and has low cost. In addition, after long-term operation, its efficient and stable conveying performance will also bring remarkable economic benefits to enterprises.

Vacuum adsorption conveying system

4、Working principle of Vacuum adsorption conveying system

Vacuum adsorption conveying systemin the course of work,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.。

Vacuum adsorption conveying system

5、Introduction of Vacuum adsorption conveying system characteristics

Vacuum adsorption conveying systemit has the characteristics of High reliability, High productivity, Less maintenance., System modularization and Flexible conveying distance，Widely used inEnvironmental protection and cleaner production,Long-distance and multipoint transportation,Long distance transportation,Long-distance and multipoint transportation,Environmental protection and cleaner production and so on，can be customized according to user's needs.。

Vacuum adsorption conveying system

6、Brief introduction of Vacuum adsorption conveying system

Vacuum adsorption conveying systemmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，The overall structural design is relatively simple，it is usually composed of control system, Conveying pipeline system, dust pelletizing system, Bunker system and delivery system，be loved by our customers.。

Vacuum adsorption conveying system

Vacuum adsorption conveying systemFlexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、The whole conveying process is sealed.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、High conveying speed, good conveying quality and high conveying efficiency.、In the process of conveying, various technological operations can be carried out at the same time, such as smash.、The materials are completely sealed during transportation.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.，the main structure includes control system, dust pelletizing system, Conveying pipeline system, Bunker system, Air source system and so on。