Introduction to Intermittent inflatable tank pneumatic conveying system and pneumatic conveying system structure principle

Intermittent inflatable tank pneumatic conveying systemmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.。

1、Brief introduction of Intermittent inflatable tank pneumatic conveying system

Intermittent inflatable tank pneumatic conveying systemis a material conveying system that uses the pressure of gas to convey powder materials.，is a popular Intermittent inflatable tank pneumatic conveying system，customizable。

Intermittent inflatable tank pneumatic conveying system

2、Introduction of advantages of Intermittent inflatable tank pneumatic conveying system

The advantages of Intermittent inflatable tank pneumatic conveying system are as follows:

1. Small floor space

Compared with other transportation modes, the Intermittent inflatable tank pneumatic conveying system system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

2. High conveying efficiency and low cost.

The Intermittent inflatable tank pneumatic conveying system can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

3. Wide application range

Intermittent inflatable tank pneumatic conveying systems are suitable for conveying powdery, granular or flowable materials, and are suitable for many industries, such as chemical industry, building materials and food. And the Intermittent inflatable tank pneumatic conveying system system can keep stable and continuous flow in long-distance transportation, thus meeting the production needs.

4. structure

Intermittent inflatable tank pneumatic conveying system has simple structure and convenient operation.

5. Multi-point to multi-point transportation

The Intermittent inflatable tank pneumatic conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Intermittent inflatable tank pneumatic conveying system

3、Introduction of Intermittent inflatable tank pneumatic conveying system characteristics

Intermittent inflatable tank pneumatic conveying systemit has the characteristics of Avoid material pollution, Less maintenance., The conveying speed is faster, Good dustproof effect and Convenient for material transportation and recovery.，at the start of the operation,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，Mainly used forMixing and classification,Heating, cooling and drying,Long distance transportation,Multi-point transportation andProcess assistance，the advantage is The conveying system is closed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.、In the conveying process, various technological operations can be carried out at the same time.、Large conveying capacity, long conveying distance and high conveying quality.、The materials are completely sealed during transportation.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.，structure mainly includes: delivery system, Conveying pipeline system, control system, Air source system, control system and so on。

Intermittent inflatable tank pneumatic conveying system

4、Intermittent inflatable tank pneumatic conveying system use

The purpose of Intermittent inflatable tank pneumatic conveying system is introduced as follows:

1. Multi-point transportation

The Intermittent inflatable tank pneumatic conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Environmental protection and cleaner production

The Intermittent inflatable tank pneumatic conveying system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

3. cut down on energy consumption

Although the power consumption of the Intermittent inflatable tank pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Intermittent inflatable tank pneumatic conveying system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. Dust removal and purification

The Intermittent inflatable tank pneumatic conveying system system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Intermittent inflatable tank pneumatic conveying system

5、Intermittent inflatable tank pneumatic conveying system structure

The Intermittent inflatable tank pneumatic conveying system structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Air source device

The air source device is the power core of the Intermittent inflatable tank pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Intermittent inflatable tank pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Intermittent inflatable tank pneumatic conveying system

6、Working principle of Intermittent inflatable tank pneumatic conveying system

Intermittent inflatable tank pneumatic conveying systemat runtime,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，It has a wide range of uses, and is often used incut down on energy consumption,Environmental protection and cleaner production,Bulk material transportation,Reduce pollution,Process assistance and so on，be loved by our customers.。

Intermittent inflatable tank pneumatic conveying system

Intermittent inflatable tank pneumatic conveying systemit is widely used intransportation,chemical industry,build a ship,metallurgy,medicine and other industries，the principle is simple.Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.。