Introduction to Unloading and discharging pneumatic conveying system and Material conveying structure principle

Unloading and discharging pneumatic conveying systemis a technology to transport solid particulate materials through air flow.，The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，widely used inbuilding material,grain processing,metallurgy,building materials,medicine and other industries，the main structure includes Conveying pipeline system, dust pelletizing system, control system, Air source system, control system and so on，the advantage is The material is completely closed in the whole conveying process.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、The materials are completely sealed during transportation.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、In the conveying process, various technological operations can be carried out at the same time.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.。

1、Brief introduction of Unloading and discharging pneumatic conveying system

Unloading and discharging pneumatic conveying systemis an advanced technology for conveying materials by aerodynamic force.，the product looks atmospheric.，features include Convenient for material transportation and recovery., Stable operation, Save manpower, Large conveying capacity and Convenient maintenance，It has a wide range of uses, including Environmental protection and cleaner production, Multi-point transportation, Process assistance, Process assistance and Long-distance and multipoint transportation，is designed by hyde with advanced technology。

Unloading and discharging pneumatic conveying system

2、Unloading and discharging pneumatic conveying system advantage

The advantages of Unloading and discharging pneumatic conveying system are as follows:

1. Small floor space

Compared with the traditional mechanical conveying mode, the Unloading and discharging pneumatic conveying system system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

2. Various process operations can be realized.

In the process of conveying, the Unloading and discharging pneumatic conveying system system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

3. High conveying efficiency and low cost.

The Unloading and discharging pneumatic conveying system system can transport materials continuously and stably, and the transportation speed is fast, which greatly improves the production efficiency and transportation capacity. Compared with other transportation modes, such as mechanical transportation or manual handling, Unloading and discharging pneumatic conveying systems can significantly reduce the stagnation time of materials in the transportation process and speed up the production process.

4. Wide application range

The Unloading and discharging pneumatic conveying system system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Unloading and discharging pneumatic conveying systems widely used in many industries.

5. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Unloading and discharging pneumatic conveying system system can be seamlessly connected with other production equipment to improve the overall production efficiency.

Unloading and discharging pneumatic conveying system

3、Unloading and discharging pneumatic conveying system application

Unloading and discharging pneumatic conveying systems have the following purposes.

1. material handling

Unloading and discharging pneumatic conveying system system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Adapt to complex environment

The Unloading and discharging pneumatic conveying system system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Unloading and discharging pneumatic conveying system pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

3. Reduce pollution

The Unloading and discharging pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Long distance transportation

The Unloading and discharging pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

5. Long-distance and multipoint transportation

The Unloading and discharging pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Unloading and discharging pneumatic conveying systems have important application value in large factories and cross-regional material transportation.

Unloading and discharging pneumatic conveying system

4、Unloading and discharging pneumatic conveying system working site

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Unloading and discharging pneumatic conveying systemt operation, and helps customers to deeply understand the Unloading and discharging pneumatic conveying system production process and production site, and gain favorable comments and recognition from customers.。

Unloading and discharging pneumatic conveying system

As you can see from the live video.，hyde powder is a kind of high quality and low price Unloading and discharging pneumatic conveying system。

5、Working principle of Unloading and discharging pneumatic conveying system

Unloading and discharging pneumatic conveying systemin the course of work,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，it has been widely used in pharmaceutical factory, plastic, medicine, build a ship, machine building and other industries，customizable。

Unloading and discharging pneumatic conveying system

6、Brief introduction of Unloading and discharging pneumatic conveying system

Unloading and discharging pneumatic conveying systemis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.，is a Unloading and discharging pneumatic conveying system，Can realize the transportation of materials in a closed pipeline.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、The whole conveying process is sealed.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.，The overall structural design is relatively simple，generally, it is composed of control system, Bunker system, delivery system, Conveying pipeline system, dust pelletizing system and other major components，is developed and improved by hyde。

Unloading and discharging pneumatic conveying system

Unloading and discharging pneumatic conveying systemit is mainly composed of Bunker system, delivery system, Conveying pipeline system, dust pelletizing system and Air source system，productSimple structure and advanced technology.，the product looks atmospheric.。