Introduction to Dilute phase negative pressure pneumatic conveying, advantages, characteristics and principles of pneumatic conveying

Dilute phase negative pressure pneumatic conveyingis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，The structure is novel, special, advanced, reasonable and scientific.，Structure consists of dust pelletizing system, Conveying pipeline system, delivery system, control system, Conveying pipeline system and so on，features include High degree of automation, Flexible conveying distance, Good dustproof effect, Wide range of conveying materials and No secondary pollution，the main structure includes Bunker system, dust pelletizing system, Air source system, delivery system and Air source system，is based on hyde powder is carefully developed by hyde combined with advanced technology。The following is to introduce the Dilute phase negative pressure pneumatic conveying:

1、Brief introduction of Dilute phase negative pressure pneumatic conveying

Dilute phase negative pressure pneumatic conveyingby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.。

Dilute phase negative pressure pneumatic conveying

2、Dilute phase negative pressure pneumatic conveying use

The purpose of Dilute phase negative pressure pneumatic conveying is introduced as follows:

1. Reduce pollution

The Dilute phase negative pressure pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Adapt to complex environment

The Dilute phase negative pressure pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Dilute phase negative pressure pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

3. material handling

Dilute phase negative pressure pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. cut down on energy consumption

Although the power consumption of the Dilute phase negative pressure pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Environmental protection and cleaner production

The Dilute phase negative pressure pneumatic conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

Dilute phase negative pressure pneumatic conveying

3、Dilute phase negative pressure pneumatic conveying function

Dilute phase negative pressure pneumatic conveyingit has the functions of Closed conveying, Automatic control, Automatic control, Explosion-proof involves and Closed conveying，the product looks atmospheric.，the main features are System modularization, Low energy consumption, Can make full use of space, Flexible pipeline layout and automation，the advantage is In the conveying process, various technological operations can be carried out at the same time.、PLC intelligent control, high degree of automation and simple operation.、It can be discharged at a single point or at multiple points.、Can be transported from point to point or from point to point, and realize long-distance operation.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation，it is mainly composed of Bunker system, dust pelletizing system, control system, Conveying pipeline system and delivery system，This productThe overall structural design is simple, diverse and beautiful.。

Dilute phase negative pressure pneumatic conveying

4、Dilute phase negative pressure pneumatic conveying structure composition

The Dilute phase negative pressure pneumatic conveying has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dilute phase negative pressure pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. control system

The control system is the "brain" of the Dilute phase negative pressure pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Dilute phase negative pressure pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Dilute phase negative pressure pneumatic conveying

5、Physical picture of Dilute phase negative pressure pneumatic conveying

Various combinations of Dilute phase negative pressure pneumatic conveying can meet the diverse needs of customers. The following are High definition real shot andthe product looks beautiful., which are trustworthy.。

Dilute phase negative pressure pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

6、How to choose the right product manufacturer?

Choosing a suitable Dilute phase negative pressure pneumatic conveying manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Dilute phase negative pressure pneumatic conveying products that meet the demand and have good cost performance.。

hyde powder

Dilute phase negative pressure pneumatic conveyingFully enclosed transportation system, materials are transported in closed pipes.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.、Remote operation can be carried out from several points to one place or from one place to several points.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、Can realize the transportation of materials in a closed pipeline.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.，multifunctional, with functions such as Physical processing assistance, material handling, Environmental protection and pollution-free, Automatic control and Environmental protection and pollution-free，Widely used in Environmental protection and cleaner production, Process assistance, material handling, Environmental protection and cleaner production and cut down on energy consumption。