What is a Sawdust particle conveying system? Introduction to the advantages, characteristics, and principles of the Powder pneumatic conveying

Sawdust particle conveying systemis a conveying system that uses airflow to convey powder and granular materials.，it is an ideal choice for customers to buy Sawdust particle conveying system。The following is to introduce the Sawdust particle conveying system:

1、Brief introduction of Sawdust particle conveying system

Sawdust particle conveying systemis a reliable material conveying system for conveying powdery materials under high pressure.。

Sawdust particle conveying system

2、Sawdust particle conveying system performance advantage

The advantages of Sawdust particle conveying system are as follows:

1. High conveying efficiency and low cost.

The continuity and high efficiency of the Sawdust particle conveying system enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

2. Flexible configuration of conveying pipeline and optimization of process flow.

The pipeline layout of the Sawdust particle conveying system is flexible, and it can be configured vertically, horizontally or curved to adapt to the complex production environment and space constraints. This flexibility makes the Sawdust particle conveying system system have great adaptability in the renovation and expansion of the factory.

3. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Sawdust particle conveying system occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

4. energy saving and environmental protection

The Sawdust particle conveying system system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

5. Easy to maintain

The Sawdust particle conveying system device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

Sawdust particle conveying system

3、Sawdust particle conveying system principle

Sawdust particle conveying systemin the course of work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，is developed and improved by hyde。

Sawdust particle conveying system

4、Sawdust particle conveying system characteristics

Sawdust particle conveying systemAvoid material pollution,Large conveying capacity,Strong adaptability,It is convenient to realize mechanization,Convenient maintenance，is carefully developed by hyde powder combined with advanced technology。

Sawdust particle conveying system

5、Sawdust particle conveying system structure

The Sawdust particle conveying system structure is introduced as follows:

1. Air source device

The air source device is the power core of the Sawdust particle conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sawdust particle conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Air source device

The air source device is the power core of the Sawdust particle conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Sawdust particle conveying system

6、Introduction of Sawdust particle conveying system characteristics

Sawdust particle conveying systemit has the characteristics of High degree of automation, Simple operation, omniseal, Centralized transportation and Long conveying distance。

Sawdust particle conveying system

Sawdust particle conveying systemThe structural design is simple, novel and special.，the main structure includes Bunker system, control system, dust pelletizing system, delivery system, Air source system and so on，the main features are convenient to use, No secondary pollution, Can make full use of space, Reliable operation and High productivity，is a kind of material conveying system which uses airflow as power to convey materials through pipeline system.。