What is a Aluminum oxide particle pneumatic conveying equipment? How much is the price of the Pneumatic conveying equipment?

Aluminum oxide particle pneumatic conveying equipmentis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.。

1、Brief introduction of Aluminum oxide particle pneumatic conveying equipment

Aluminum oxide particle pneumatic conveying equipmentis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，Widely used inReduce pollution,Long-distance and multipoint transportation,Multi-point transportation,cut down on energy consumption,Dust removal and essence and so on，customizable。

Aluminum oxide particle pneumatic conveying equipment

2、Aluminum oxide particle pneumatic conveying equipment use

The purpose of Aluminum oxide particle pneumatic conveying equipment is introduced as follows:

1. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Aluminum oxide particle pneumatic conveying equipment pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

2. Long distance transportation

The Aluminum oxide particle pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. Adapt to complex environment

The Aluminum oxide particle pneumatic conveying equipment system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Aluminum oxide particle pneumatic conveying equipment pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

4. save energy and cut emissions

Although the Aluminum oxide particle pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Process assistance

In some production processes, Aluminum oxide particle pneumatic conveying equipments are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Aluminum oxide particle pneumatic conveying equipment system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Aluminum oxide particle pneumatic conveying equipment

3、Functional advantages of Aluminum oxide particle pneumatic conveying equipment

Aluminum oxide particle pneumatic conveying equipments have the following advantages.

1. Save space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Aluminum oxide particle pneumatic conveying equipment occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

2. versatility

While conveying materials, the Aluminum oxide particle pneumatic conveying equipment system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling and so on. This versatility makes the Aluminum oxide particle pneumatic conveying equipment more flexible and adaptable in the production process.

3. High degree of automation

The Aluminum oxide particle pneumatic conveying equipment system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

4. The quality of convey materials is ensure.

In the process of conveying, the Aluminum oxide particle pneumatic conveying equipment system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

5. Improve conveying efficiency

The Aluminum oxide particle pneumatic conveying equipment system can realize the direct transportation of bulk materials without additional packaging and loading and unloading processes, thus significantly improving the transportation efficiency and reducing the cost of packaging, loading and unloading transportation.

Aluminum oxide particle pneumatic conveying equipment

4、Working principle of Aluminum oxide particle pneumatic conveying equipment

Aluminum oxide particle pneumatic conveying equipmentthe principle is simple.Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，The structural design is more advanced and reasonable.，it is mainly composed of Air source system, delivery system, dust pelletizing system, delivery system and Bunker system，the advantage is The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、Materials are transported by closed pipelines.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、PLC intelligent control, high degree of automation and simple operation.、In the conveying process, various technological operations can be carried out at the same time.、It can feed from one place to many places for decentralized transportation and realize long-distance operation.，It has a wide range of uses, including Long-distance and multipoint transportation, Process assistance, material handling, Mixing and classification and Heating, cooling and drying，by forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.。

Aluminum oxide particle pneumatic conveying equipment

5、Structural characteristics of Aluminum oxide particle pneumatic conveying equipment

The Aluminum oxide particle pneumatic conveying equipment structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. control system

The control system is the "brain" of the Aluminum oxide particle pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Air source device

The air source device is the power core of the Aluminum oxide particle pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Aluminum oxide particle pneumatic conveying equipment

6、How much is the Aluminum oxide particle pneumatic conveying equipment?

The Aluminum oxide particle pneumatic conveying equipment price is introduced as follows:

1. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

2. product quality

The selling price of excellent quality products is also high, so users should also consider the quality and price of products comprehensively when purchasing products, so as to buy products with high cost performance.

3. Configuration level

Usually, the quotation of Aluminum oxide particle pneumatic conveying equipment changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

4. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. Reasonable sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

Aluminum oxide particle pneumatic conveying equipment

Aluminum oxide particle pneumatic conveying equipmentusually used in build a ship, environmental protection, plastic, power, metallurgy and other fields，it has the structure of Air source system, Conveying pipeline system, Bunker system, dust pelletizing system and control system，This productSimple structure and advanced technology.。