What is a Dry lime pneumatic conveying equipment? Introduction to the advantages, characteristics, and principles of the Pneumatic conveying equipment

Dry lime pneumatic conveying equipmentis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，it mainly includes Bunker system, Conveying pipeline system, delivery system, Air source system and control system，is a Dry lime pneumatic conveying equipment newly developed by hyde powder。

1、Brief introduction of Dry lime pneumatic conveying equipment

Dry lime pneumatic conveying equipmentit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.，it can be used in environmental protection, building materials, power, machine building, logistics and other industries，In the process of conveying, various technological operations can be carried out at the same time, such as smash.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、Materials are transported by closed pipelines.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.。

Dry lime pneumatic conveying equipment

2、Dry lime pneumatic conveying equipment HD picture real shot

The Dry lime pneumatic conveying equipment has been upgraded, and the beauty of details is appreciated.。

Dry lime pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Dry lime pneumatic conveying equipment use

The purpose of Dry lime pneumatic conveying equipment is introduced as follows:

1. Reduce pollution

The Dry lime pneumatic conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Multi-point transportation

The Dry lime pneumatic conveying equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. cut down on energy consumption

Although the power consumption of the Dry lime pneumatic conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Bulk material transportation

The Dry lime pneumatic conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Dry lime pneumatic conveying equipment, these materials can be efficiently transferred between different production links or equipment.

5. Dust removal and purification

The Dry lime pneumatic conveying equipment system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Dry lime pneumatic conveying equipment

4、Dry lime pneumatic conveying equipment structure

The Dry lime pneumatic conveying equipment structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dry lime pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Air source device

The air source device is the power core of the Dry lime pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Dry lime pneumatic conveying equipment

5、Dry lime pneumatic conveying equipment principle

Dry lime pneumatic conveying equipmentMainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，multifunctional, with functions such as Automatic control, Environmental protection and pollution-free, Closed conveying, Explosion-proof involves and Physical processing assistance，it has the characteristics of Stable operation, Reliable equipment, Easy maintenance, convenient to use and High degree of automation，be of high quality，The price is relatively low.。

Dry lime pneumatic conveying equipment

6、Dry lime pneumatic conveying equipment price

The Dry lime pneumatic conveying equipment price is introduced as follows:

1. region

hyde address:jinan, Shandong province, the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

2. market demand

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Dry lime pneumatic conveying equipment. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

3. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

4. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Dry lime pneumatic conveying equipment have more or less differences in price.

5. quality factor

The price of Dry lime pneumatic conveying equipment is affected by the quality of products. Only when the products are of good quality can we create greater profits for customers and recover the costs for customers as soon as possible. However, products with good quality have a lot of investment in technology, manpower and time, so their prices are higher than those of ordinary products. On the contrary, the products of general quality are equal in effort and gain, and the sales price is also low. But there are exceptions. Many manufacturers often adopt the mode of small profits but quick turnover. If customers can choose products with high cost performance, it is a good choice for long-term investment.

Dry lime pneumatic conveying equipment

Dry lime pneumatic conveying equipmentRemote operation can be carried out from several points to one place in a centralized way or from one place to several points in a decentralized way.、Materials are transported in a closed pipeline.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as cool.、The material is completely closed in the whole conveying process.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.，is to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.。