What is a Sintering dust conveying equipment? Introduction to the Working Principle of pneumatic conveying system

Sintering dust conveying equipmentis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，the product looks atmospheric.，the advantage is Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.、Fully enclosed transportation system, materials are transported in closed pipes.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、In the conveying process, various technological operations can be carried out at the same time.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation。

1、Brief introduction of Sintering dust conveying equipment

Sintering dust conveying equipmentis a method of conveying materials through pipelines by using air flow with a certain speed.，it has the characteristics of Convenient maintenance, be of simple construction, High reliability, Simple operation and No secondary pollution，It has a wide range of uses, including material handling, Dust removal and essence, material handling, Long-distance and multipoint transportation and Bulk material transportation，can be customized according to user's needs.。

Sintering dust conveying equipment

2、Sintering dust conveying equipment real shot picture

Provide a variety of specifications and models of Sintering dust conveying equipment, high-definition picture list.。

Sintering dust conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Sintering dust conveying equipment structure composition

The Sintering dust conveying equipment has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sintering dust conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. control system

The control system is the "brain" of the Sintering dust conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Air source device

The air source device is the power core of the Sintering dust conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Sintering dust conveying equipment

4、Sintering dust conveying equipment real beat

Provide high-definition Sintering dust conveying equipment real shot, a variety of specifications and models for customers to visit.。

Sintering dust conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Functional advantages of Sintering dust conveying equipment

Sintering dust conveying equipments have the following advantages.

1. Multi-point to multi-point transportation

The Sintering dust conveying equipment system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. Wide application range

For materials with unstable chemical properties, the Sintering dust conveying equipment system can use inert gas for transportation to ensure the stability of the materials during transportation.

3. High conveying efficiency and low cost.

The Sintering dust conveying equipment system uses gas to convey materials, which has high conveying speed and capacity and can realize continuous and efficient transportation.

4. versatility

While conveying materials, the Sintering dust conveying equipment system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

5. High degree of automation

The Sintering dust conveying equipment system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

Sintering dust conveying equipment

6、Introduction of Sintering dust conveying equipment characteristics

Sintering dust conveying equipmentfeatures include Flexible layout, Easy to use, Flexible transmission line, Easy to realize automation and Simple system，is a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，The overall structural design is simple and novel.，the main structure includes dust pelletizing system, delivery system, Bunker system, Conveying pipeline system and delivery system，the product looks beautiful.，be loved by our customers.。

Sintering dust conveying equipment

Sintering dust conveying equipmentit is widely used in heat-engine plant, building materials, transportation, logistics, cast and other industries，it mainly includes dust pelletizing system, Conveying pipeline system, control system, Air source system and Conveying pipeline system。