Introduction to Inert gas circulation and transportation, how much is the price of the Powder pneumatic conveying?

Inert gas circulation and transportationis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，has been favored by more and more customers.。The following is to introduce the Inert gas circulation and transportation:

1、Brief introduction of Inert gas circulation and transportation

Inert gas circulation and transportationis a kind of technology integrated material conveying equipment which uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as cool.、Closed pipeline transportation，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.，it is usually composed of control system, Conveying pipeline system, dust pelletizing system, Bunker system and delivery system，can be customized according to user's needs.。

Inert gas circulation and transportation

2、Inert gas circulation and transportation structure

The Inert gas circulation and transportation structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Air source device

The air source device is the power core of the Inert gas circulation and transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. control system

The control system is the "brain" of the Inert gas circulation and transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Inert gas circulation and transportation

3、Inert gas circulation and transportation function

Inert gas circulation and transportationit has the functions of Closed conveying, Explosion-proof involves, Automatic control, Environmental protection and pollution-free and material handling，It can be used for cut down on energy consumption, Dust removal and essence, Mixing and classification, Bulk material transportation, Long-distance and multipoint transportation, Process assistance and so on，Simple operation,Flexible conveying distance,Flexible pipeline layout,Safe and reliable,Simple system，at the start of the operation,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，is a kind of high quality and low price Inert gas circulation and transportation。

Inert gas circulation and transportation

4、Inert gas circulation and transportation use

The purpose of Inert gas circulation and transportation is introduced as follows:

1. Long distance transportation

The Inert gas circulation and transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. material handling

Inert gas circulation and transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Inert gas circulation and transportation pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. Multi-point transportation

The Inert gas circulation and transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Mixing and classification

In the process of conveying, the Inert gas circulation and transportation system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

Inert gas circulation and transportation

5、Inert gas circulation and transportation structure composition

The Inert gas circulation and transportation has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Inert gas circulation and transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Inert gas circulation and transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Inert gas circulation and transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Inert gas circulation and transportation

Inert gas circulation and transportationwidely used intransportation,build a ship,grain processing,building materials,building material and other industries，it has the functions of Physical processing assistance, Explosion-proof involves, Closed conveying, Automatic control and Environmental protection and pollution-free，the main features are automation, Less maintenance., Strong adaptability, High degree of automation and automation。