Introduction to Polyethylene powder pneumatic conveying system, Powder conveying specifications, model parameters

Polyethylene powder pneumatic conveying systemis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.，it is usually composed of Bunker system, delivery system, Conveying pipeline system, Air source system and control system，the product looks beautiful.。The following is to introduce the Polyethylene powder pneumatic conveying system:

1、Brief introduction of Polyethylene powder pneumatic conveying system

Polyethylene powder pneumatic conveying systemis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，It has the functions of Environmental protection and cleaner production, Bulk material transportation, Mixing and classification, Process assistance and cut down on energy consumption。

Polyethylene powder pneumatic conveying system

2、Polyethylene powder pneumatic conveying system use

The purpose of Polyethylene powder pneumatic conveying system is introduced as follows:

1. cut down on energy consumption

Although the power consumption of the Polyethylene powder pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

2. Multi-point transportation

The Polyethylene powder pneumatic conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. Reduce pollution

The Polyethylene powder pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. save energy and cut emissions

Although the Polyethylene powder pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Reduce pollution

The Polyethylene powder pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

Polyethylene powder pneumatic conveying system

3、Polyethylene powder pneumatic conveying system structure

The Polyethylene powder pneumatic conveying system structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Polyethylene powder pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Air source device

The air source device is the power core of the Polyethylene powder pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Polyethylene powder pneumatic conveying system

4、Working principle of Polyethylene powder pneumatic conveying system

Polyethylene powder pneumatic conveying systemthe principle is simple.Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，has been favored by more and more customers.。

Polyethylene powder pneumatic conveying system

5、How much is the Polyethylene powder pneumatic conveying system?

The Polyethylene powder pneumatic conveying system price is introduced as follows:

1. Company size

hyde's scale and strength are relatively strong, the technology and technology of products produced by manufacturers are relatively advanced, and there is less waste of resources in the process of manufacturing, and the price of products will be relatively low.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

4. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

5. Brand strength

At present, there are various brands of Polyethylene powder pneumatic conveying system in jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Polyethylene powder pneumatic conveying system are different.

Polyethylene powder pneumatic conveying system

6、Company service

On the premise of ensuring high quality and low price, hyde powder can also provide customers with high-standard services, help customers choose appropriate specifications and models, and install and debug products on site for them free of charge. If customers have special requirements, our company can also train product operators in operation knowledge. Besides, if everyone's products fail at any time, our company will rush to the scene to solve them in a short time and deal with them in time.。

hyde

Polyethylene powder pneumatic conveying systemWidely used inmaterial handling,Long-distance and multipoint transportation,Reduce pollution,cut down on energy consumption,Multi-point transportation and so on，it is widely used in metallurgy, logistics, power, transportation and heat-engine plant，is a kind of high quality and low price Polyethylene powder pneumatic conveying system。