Introduction to Inert gas transportation and Powder conveying advantages and features

Inert gas transportationIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，It has the functions of Long distance transportation, Mixing and classification, cut down on energy consumption, Environmental protection and cleaner production and Multi-point transportation，the product looks beautiful.，the advantage is Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, and wide selection range.、The conveying system is closed.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as dry.，customizable。

1、Brief introduction of Inert gas transportation

Inert gas transportationis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，it has the functions of Automatic control, Closed conveying, Environmental protection and pollution-free, Automatic control and Physical processing assistance，the principle is simple.Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，Cheap and high quality。

Inert gas transportation

2、Inert gas transportation principle

Inert gas transportationat runtime,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，is an advanced Inert gas transportation developed by our company in combination with the actual situation of the industry。

Inert gas transportation

3、Inert gas transportation performance advantage

Inert gas transportations have the following advantages.

1. Efficient continuous transportation

The Inert gas transportation system can transport materials continuously and stably, and the transportation speed is fast, which greatly improves the production efficiency and transportation capacity. Compared with other transportation modes, such as mechanical transportation or manual handling, Inert gas transportations can significantly reduce the stagnation time of materials in the transportation process and speed up the production process.

2. Generality

The Inert gas transportation system can be suitable for all kinds of loose, dry and non-sticky materials, especially for some environmentally sensitive materials such as inflammable, explosive, toxic and harmful, and smelly, and can realize safe and reliable transportation.

3. Multi-point to multi-point transportation

The Inert gas transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. Environmental protection and pollution-free

Compared with the traditional mechanical transportation mode, the Inert gas transportation has higher transportation efficiency, which can reduce transportation time and transportation cost. Moreover, the Inert gas transportation does not need additional power to drive, which reduces energy consumption.

5. Material quality protection

In the process of conveying, the Inert gas transportation can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

Inert gas transportation

4、Inert gas transportation introduction video

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Inert gas transportationt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Inert gas transportation

As you can see from the live video.，hyde is an advanced technology for conveying materials by aerodynamic force.。

5、Inert gas transportation use

The purpose of Inert gas transportation is introduced as follows:

1. cut down on energy consumption

Although the power consumption of the Inert gas transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

2. save energy and cut emissions

Although the Inert gas transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Adapt to complex environment

The Inert gas transportation system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Inert gas transportation pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

4. Bulk material transportation

The Inert gas transportation is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Inert gas transportation, these materials can be efficiently transferred between different production links or equipment.

5. Long distance transportation

The Inert gas transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Inert gas transportation

6、Structural characteristics of Inert gas transportation

The Inert gas transportation structure is introduced as follows:

1. Air source device

The air source device is the power core of the Inert gas transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Inert gas transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Inert gas transportation

Inert gas transportationthe product looks beautiful.，usually used in metallurgy, machine building, transportation, pharmaceutical factory, cast and other fields。