What is a Closed pneumatic conveying? Introduction to the advantages and characteristics of pneumatic conveying system functions

Closed pneumatic conveyingis a material conveying device that uses the pressure of gas to convey powder materials.。

1、Brief introduction of Closed pneumatic conveying

Closed pneumatic conveyingis a technology that uses the energy of air flow to continuously convey powdery and granular materials.，is a popular Closed pneumatic conveying，it has the structure of Bunker system, control system, Bunker system, dust pelletizing system and Air source system，Closed pneumatic conveyingThe overall structural design is relatively simple。

Closed pneumatic conveying

2、Functional advantages of Closed pneumatic conveying

Closed pneumatic conveyings have the following advantages.

1. Material quality protection

In the process of conveying, the Closed pneumatic conveying system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

2. be of simple construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

3. Multiple process operations can be carried out at the same time

The Closed pneumatic conveying system can not only realize the transportation of materials, but also carry out various technological operations at the same time, such as mixing, crushing, grading, drying and cooling. This versatility makes Closed pneumatic conveyings widely used in many industries.

4. Strong adaptability

The Closed pneumatic conveying system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Closed pneumatic conveyings widely used in many industries.

5. Totally enclosed conveying

The pipeline layout of the Closed pneumatic conveying is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Closed pneumatic conveying system to adapt to various complex production environments and meet different production needs.

Closed pneumatic conveying

3、Closed pneumatic conveying advantage

The advantages of Closed pneumatic conveying are as follows:

1. energy saving and environmental protection

The Closed pneumatic conveying system is completely closed, which reduces the flying of dust and meets the requirements of environmental protection. This is especially important for those industries that require high environmental protection.

2. Save space

Compared with the traditional mechanical conveying mode, the Closed pneumatic conveying system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

3. High degree of automation

The Closed pneumatic conveying system is easy to realize automatic control and can be operated through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

4. Efficient continuous transportation

The Closed pneumatic conveying system can realize the direct transportation of bulk materials without additional packaging and loading and unloading processes, thus significantly improving the transportation efficiency and reducing the cost of packaging, loading and unloading transportation.

5. High conveying quality

In the process of conveying, the Closed pneumatic conveying can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

Closed pneumatic conveying

4、Closed pneumatic conveying introduction video

On-site aerial photography of Closed pneumatic conveying。

Closed pneumatic conveying

As you can see from the live video.，hyde Closed pipeline transportation，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、Multi-point feeding and multi-point discharging are possible.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、The whole conveying process is sealed.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、It can feed from one place to many places for decentralized transportation and realize long-distance operation.。

5、Closed pneumatic conveying use

The purpose of Closed pneumatic conveying is introduced as follows:

1. save energy and cut emissions

Although the Closed pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. cut down on energy consumption

Although the power consumption of the Closed pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. Long distance transportation

The Closed pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

4. save energy and cut emissions

Although the Closed pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Process assistance

In some production processes, Closed pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Closed pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Closed pneumatic conveying

6、How much is the Closed pneumatic conveying?

The Closed pneumatic conveying price is introduced as follows:

1. quality factor

Quality generally refers to the quality of the product. The better the quality, the higher the quality of the product. Because the quality is directly proportional to the cost of the product, the price of the Closed pneumatic conveying will vary greatly. hyde powder attaches great importance to the quality of products, and the formulation of prices is also reasonable.

2. Less intermediate links

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Closed pneumatic conveying is low.

3. market factors

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Closed pneumatic conveying. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

4. Configuration level

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

5. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Closed pneumatic conveying manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Closed pneumatic conveying price can meet the purchasing needs of customers.

Closed pneumatic conveying

Closed pneumatic conveyingis a common Closed pneumatic conveying，Simple structure and advanced technology.，the main structure includes Conveying pipeline system, delivery system, Bunker system, delivery system, control system and so on。