Introduction to Ash calcium powder pneumatic conveying system and pneumatic conveying system structure principle

Ash calcium powder pneumatic conveying systemis an efficient and environment-friendly way to transport materials by using the energy of airflow.，the product looks beautiful.，it is an ideal choice for customers to buy Ash calcium powder pneumatic conveying system。

1、Brief introduction of Ash calcium powder pneumatic conveying system

Ash calcium powder pneumatic conveying systemis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.。

Ash calcium powder pneumatic conveying system

2、Ash calcium powder pneumatic conveying system principle

Ash calcium powder pneumatic conveying systemthe principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，features include Easy to automate management, High degree of automation, Fast conveying speed, Strong adaptability and Efficient and flexible，is a technology that uses the energy of air flow to continuously convey powdery and granular materials.，the advantage is Can realize the transportation of materials in a closed pipeline.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、Materials are transported by closed pipelines.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.，is a kind of high quality and low price Ash calcium powder pneumatic conveying system。

Ash calcium powder pneumatic conveying system

3、Introduction of advantages of Ash calcium powder pneumatic conveying system

The advantages of Ash calcium powder pneumatic conveying system are as follows:

1. Strong adaptability

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Ash calcium powder pneumatic conveying system.

2. structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

3. Small floor space

Compared with other transportation modes, the Ash calcium powder pneumatic conveying system system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

4. versatility

In the process of conveying, the Ash calcium powder pneumatic conveying system system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

5. Multi-point to multi-point transportation

The Ash calcium powder pneumatic conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Ash calcium powder pneumatic conveying system

4、Ash calcium powder pneumatic conveying system customer scene picture

Excellent material selection,the product looks atmospheric., trustworthy, panoramic shooting, helpful for customer reference.。

Ash calcium powder pneumatic conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Ash calcium powder pneumatic conveying system structure

The Ash calcium powder pneumatic conveying system structure is introduced as follows:

1. Air source device

The air source device is the power core of the Ash calcium powder pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Air source device

The air source device is the power core of the Ash calcium powder pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Ash calcium powder pneumatic conveying system

6、Ash calcium powder pneumatic conveying system price

The Ash calcium powder pneumatic conveying system price is introduced as follows:

1. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

2. Manufacturer's strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

5. Sales model

hyde has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

Ash calcium powder pneumatic conveying system

Ash calcium powder pneumatic conveying systemFlexible conveying distance,Good dustproof effect,energy saving and environmental protection,Convenient maintenance,versatility，It has the functions of Environmental protection and cleaner production, Long-distance and multipoint transportation, Long distance transportation, Reduce pollution and Heating, cooling and drying。