What is a Molybdenum oxide pneumatic conveying system? Pneumatic conveying equipment specifications, models, and parameters

Molybdenum oxide pneumatic conveying systemis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，at the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，The structural design is more advanced and reasonable.，Structure consists of delivery system, Air source system, Conveying pipeline system, dust pelletizing system, Bunker system and so on，the main features are Flexible conveying distance, High production efficiency, Convenient for material transportation and recovery., Can carry out long-distance dispersion transportation. and Fast conveying speed，has been favored by more and more customers.。

1、Brief introduction of Molybdenum oxide pneumatic conveying system

Molybdenum oxide pneumatic conveying systemis a kind of technology integrated material conveying equipment which uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，the advantage is Materials collected from several points can be sent to one place or one place to scattered points.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、The whole conveying process is sealed.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，at work,Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.，is designed by hyde powder with advanced technology。

Molybdenum oxide pneumatic conveying system

2、Molybdenum oxide pneumatic conveying system introduction video

The following is the live video of Molybdenum oxide pneumatic conveying system designed and produced by hyde for users, from which we can see the The materials are completely sealed during transportation.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、Fully enclosed transportation system, materials are transported in closed pipes.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation of hyde powderMolybdenum oxide pneumatic conveying system.。

Molybdenum oxide pneumatic conveying system

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. it has been widely used in power, metallurgy, plastic, environmental protection, logistics and other industries。

3、Molybdenum oxide pneumatic conveying system structure composition

The Molybdenum oxide pneumatic conveying system has the following structure

1. control system

The control system is the "brain" of the Molybdenum oxide pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Molybdenum oxide pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Molybdenum oxide pneumatic conveying system

4、Functional advantages of Molybdenum oxide pneumatic conveying system

Molybdenum oxide pneumatic conveying systems have the following advantages.

1. High conveying quality

In the process of conveying, the Molybdenum oxide pneumatic conveying system system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

2. Small floor space

Compared with the traditional mechanical conveying mode, the Molybdenum oxide pneumatic conveying system system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

3. Multi-point to multi-point transportation

The Molybdenum oxide pneumatic conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. Wide application range

The Molybdenum oxide pneumatic conveying system system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

5. Totally enclosed conveying

The Molybdenum oxide pneumatic conveying system is carried out in a closed pipeline, which effectively prevents dust from flying and escaping. This fully enclosed transportation mode not only improves the working environment, reduces the risk of occupational diseases, but also reduces environmental pollution, and meets the requirements of modern enterprises for environmental protection.

Molybdenum oxide pneumatic conveying system

5、Molybdenum oxide pneumatic conveying system HD real shot

Details of hyde powder Molybdenum oxide pneumatic conveying system,the product looks beautiful.。

Molybdenum oxide pneumatic conveying system

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Introduction of advantages of Molybdenum oxide pneumatic conveying system

The advantages of Molybdenum oxide pneumatic conveying system are as follows:

1. Convenient maintenance and easy automation.

The Molybdenum oxide pneumatic conveying system device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

2. Environmental protection and pollution-free

The Molybdenum oxide pneumatic conveying system system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

3. High degree of automation

The Molybdenum oxide pneumatic conveying system system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

4. Low maintenance cost

The Molybdenum oxide pneumatic conveying system system has less wear parts, lower maintenance cost and higher reliability, which reduces the risk of production interruption.

5. energy saving and environmental protection

In the process of Molybdenum oxide pneumatic conveying system opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

Molybdenum oxide pneumatic conveying system

Molybdenum oxide pneumatic conveying systemIt is mostly used in Reduce pollution, Multi-point transportation, material handling, Mixing and classification, Long distance transportation, Dust removal and essence and so on，it has the structure of Conveying pipeline system, delivery system, Air source system, control system and dust pelletizing system。