Introduction to Sand and sediment pneumatic conveying equipment, Pneumatic conveying equipment specifications, model parameters

Sand and sediment pneumatic conveying equipmentis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.。The following is to introduce the Sand and sediment pneumatic conveying equipment:

1、Brief introduction of Sand and sediment pneumatic conveying equipment

Sand and sediment pneumatic conveying equipmentis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，the product looks beautiful.。

Sand and sediment pneumatic conveying equipment

2、Sand and sediment pneumatic conveying equipment structure

The Sand and sediment pneumatic conveying equipment structure is introduced as follows:

1. Air source device

The air source device is the power core of the Sand and sediment pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sand and sediment pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Air source device

The air source device is the power core of the Sand and sediment pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Sand and sediment pneumatic conveying equipment

3、Introduction of advantages of Sand and sediment pneumatic conveying equipment

The advantages of Sand and sediment pneumatic conveying equipment are as follows:

1. Strong adaptability

A conveying system can convey different kinds of products at different times. In fact, all powders and particles can be transported by the Sand and sediment pneumatic conveying equipment.

2. Improve conveying efficiency

The continuity and high efficiency of the Sand and sediment pneumatic conveying equipment enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

3. be simple in structure

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

4. Flexible configuration of conveying pipeline and optimization of process flow.

The pipeline layout of the Sand and sediment pneumatic conveying equipment is flexible, and it can be configured vertically, horizontally or curved to adapt to the complex production environment and space constraints. This flexibility makes the Sand and sediment pneumatic conveying equipment system have great adaptability in the renovation and expansion of the factory.

5. Low maintenance cost

The Sand and sediment pneumatic conveying equipment system has less wear parts, lower maintenance cost and higher reliability, which reduces the risk of production interruption.

Sand and sediment pneumatic conveying equipment

4、Sand and sediment pneumatic conveying equipment use

The purpose of Sand and sediment pneumatic conveying equipment is introduced as follows:

1. Bulk material transportation

The Sand and sediment pneumatic conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Sand and sediment pneumatic conveying equipment, these materials can be efficiently transferred between different production links or equipment.

2. Multi-point transportation

The Sand and sediment pneumatic conveying equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

3. material handling

Sand and sediment pneumatic conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. save energy and cut emissions

Although the Sand and sediment pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Adapt to complex environment

The Sand and sediment pneumatic conveying equipment system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Sand and sediment pneumatic conveying equipment pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

Sand and sediment pneumatic conveying equipment

5、Sand and sediment pneumatic conveying equipment structure composition

The Sand and sediment pneumatic conveying equipment has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. control system

The control system is the "brain" of the Sand and sediment pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. control system

The control system is the "brain" of the Sand and sediment pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Sand and sediment pneumatic conveying equipment

6、hyde powder workshop real shot

The finished products of the Sand and sediment pneumatic conveying equipment factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde

The finished products of the Sand and sediment pneumatic conveying equipment factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Sand and sediment pneumatic conveying equipmentClosed pipeline transportation，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、It is suitable for centralized transportation from many places to one place, with one or several feeding points, and realizes long-distance operation.、The whole conveying process is sealed.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.，Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，Avoid material pollution,Convenient operation and management,Flexible conveying distance,Convenient maintenance,Wide range of conveying materials。