What is a Huangsha pneumatic conveying equipment? Powder conveying specifications, models, and parameters

Huangsha pneumatic conveying equipmentthat is, the technology of conveying granular materials in closed pipes by air flow.，In the conveying process, various technological operations can be carried out at the same time.、Materials are transported in a closed pipeline.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the conveying process, various technological operations can be carried out at the same time.、The conveying system is closed.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、Can be charged at one place and then discharged at multiple places.，is based on hyde is a Huangsha pneumatic conveying equipment newly developed by hyde。

1、Brief introduction of Huangsha pneumatic conveying equipment

Huangsha pneumatic conveying equipmentalso known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.。

Huangsha pneumatic conveying equipment

2、On-site real shot of Huangsha pneumatic conveying equipment

HD pictures of Huangsha pneumatic conveying equipment of different specifications and models。

Huangsha pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Huangsha pneumatic conveying equipment structure composition

The Huangsha pneumatic conveying equipment has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Huangsha pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Air source device

The air source device is the power core of the Huangsha pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Huangsha pneumatic conveying equipment

4、Huangsha pneumatic conveying equipment application

Huangsha pneumatic conveying equipments have the following purposes.

1. Bulk material transportation

The Huangsha pneumatic conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Huangsha pneumatic conveying equipment, these materials can be efficiently transferred between different production links or equipment.

2. Mixing and classification

In the process of conveying, the Huangsha pneumatic conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

3. Long-distance and multipoint transportation

The Huangsha pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Huangsha pneumatic conveying equipments have important application value in large factories and cross-regional material transportation.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Huangsha pneumatic conveying equipment pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. material handling

Huangsha pneumatic conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Huangsha pneumatic conveying equipment

5、Huangsha pneumatic conveying equipment advantage

The advantages of Huangsha pneumatic conveying equipment are as follows:

1. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Huangsha pneumatic conveying equipment occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

2. The quality of convey materials is ensure.

In the process of conveying, the Huangsha pneumatic conveying equipment system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

3. structure

Huangsha pneumatic conveying equipment has simple structure and convenient operation.

4. Convenient maintenance and easy automation.

The Huangsha pneumatic conveying equipment system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

5. Wide application range

For materials with unstable chemical properties, the Huangsha pneumatic conveying equipment system can use inert gas for transportation to ensure the stability of the materials during transportation.

Huangsha pneumatic conveying equipment

Huangsha pneumatic conveying equipmentit can be used in environmental protection, metallurgy, power, cast, machine building and other industries，at the start of the operation,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.。