What is a Silica pneumatic conveying equipment? Introduction to the advantages and characteristics of pneumatic conveying functions

Silica pneumatic conveying equipmentis a technology that uses the energy of air flow to continuously convey powdery and granular materials.。

1、Brief introduction of Silica pneumatic conveying equipment

Silica pneumatic conveying equipmentit uses the kinetic energy and pressure energy of air flow to transport materials from the starting point to the destination pipeline.，Widely used in Mixing and classification, Long-distance and multipoint transportation, Dust removal and essence, Heating, cooling and drying and Long distance transportation。

Silica pneumatic conveying equipment

2、Structural advantages of Silica pneumatic conveying equipment

The Silica pneumatic conveying equipment has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Air source device

The air source device is the power core of the Silica pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. control system

The control system is the "brain" of the Silica pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Silica pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Silica pneumatic conveying equipment

3、Silica pneumatic conveying equipment real beat

Silica pneumatic conveying equipment HD factory map, all-round shooting, for our customers to visit.。

Silica pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Advantages of Silica pneumatic conveying equipment principle

Silica pneumatic conveying equipmentat the start of the operation,Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.，it is usually composed of Air source system, Air source system, dust pelletizing system, Bunker system and delivery system，the main features are Convenient maintenance, Convenient maintenance, Avoid material pollution, The failure rate is low and Economic and environmental protection，the product looks beautiful.，has been favored by more and more customers.。

Silica pneumatic conveying equipment

5、Silica pneumatic conveying equipment structure composition

The Silica pneumatic conveying equipment structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. control system

The control system is the "brain" of the Silica pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Silica pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Silica pneumatic conveying equipment

6、Working principle of Silica pneumatic conveying equipment

Silica pneumatic conveying equipmentat work,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、Can be transported from point to point or from point to point, and realize long-distance operation.、Materials are transported by closed pipelines.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、Materials are transported in a closed pipeline.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、Large conveying capacity, long conveying distance and high conveying quality.，it has the functions of Closed conveying, Automatic control, Environmental protection and pollution-free, material handling and Physical processing assistance。

Silica pneumatic conveying equipment

Silica pneumatic conveying equipmentmultifunctional, with functions such as Environmental protection and pollution-free, material handling, Closed conveying, Physical processing assistance and Explosion-proof involves，the advantage is PLC intelligent control, high degree of automation and simple operation.、Can be charged at one place and then discharged at multiple places.、The material is completely closed in the whole conveying process.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the conveying process, various technological operations can be carried out at the same time.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation。