What is a Graphene pneumatic conveying equipment? Powder conveying specifications, models, and parameters

Graphene pneumatic conveying equipmentis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.，can be customized according to user's needs.。The following is to introduce the Graphene pneumatic conveying equipment:

1、Brief introduction of Graphene pneumatic conveying equipment

Graphene pneumatic conveying equipmentis a reliable material conveying equipment for conveying powdery materials under high pressure.，structure mainly includes: Air source system, control system, dust pelletizing system, Bunker system, Air source system and so on，This Graphene pneumatic conveying equipmentThe overall structural design is simple and novel.，has been favored by more and more customers.。

Graphene pneumatic conveying equipment

2、Introduction of advantages of Graphene pneumatic conveying equipment

Graphene pneumatic conveying equipments have the following advantages.

1. Multi-point to multi-point transportation

The Graphene pneumatic conveying equipment system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. Strong adaptability

For materials with unstable chemical properties, the Graphene pneumatic conveying equipment system can use inert gas for transportation to ensure the stability of the materials during transportation.

3. Small floor space

Compared with other transportation modes, the Graphene pneumatic conveying equipment system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

4. Environmental protection and pollution-free

The Graphene pneumatic conveying equipment system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

5. Easy to maintain

The Graphene pneumatic conveying equipment device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

Graphene pneumatic conveying equipment

3、Graphene pneumatic conveying equipment function

Graphene pneumatic conveying equipmentit has the functions of Explosion-proof involves, material handling, Physical processing assistance, Environmental protection and pollution-free and material handling，features include Quantitative transportation, Efficient and flexible, The failure rate is low, be of simple construction and convenient to use，at runtime,Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.，is a Graphene pneumatic conveying equipment newly developed by hyde。

Graphene pneumatic conveying equipment

4、Advantages of Graphene pneumatic conveying equipment principle

Graphene pneumatic conveying equipmentthe principle is simple.The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，is a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.，the main features are It is convenient to realize mechanization, Flexible layout, automation, Convenient maintenance and omniseal，is a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，It is a product series that integrates Mixing and classification, Long-distance and multipoint transportation, material handling, Environmental protection and cleaner production and Process assistance。

Graphene pneumatic conveying equipment

5、Graphene pneumatic conveying equipment use

The purpose of Graphene pneumatic conveying equipment is introduced as follows:

1. Adapt to complex environment

The Graphene pneumatic conveying equipment system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Graphene pneumatic conveying equipment pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

2. cut down on energy consumption

Although the power consumption of the Graphene pneumatic conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. save energy and cut emissions

Although the Graphene pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. Dust removal and purification

The Graphene pneumatic conveying equipment system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

5. Multi-point transportation

The Graphene pneumatic conveying equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

Graphene pneumatic conveying equipment

6、How to choose the right product manufacturer?

Choosing a suitable Graphene pneumatic conveying equipment manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Graphene pneumatic conveying equipment products that meet the demand and have good cost performance.。

hyde

Graphene pneumatic conveying equipmentit is widely used intransportation,medicine,cast,metallurgy,chemical industry and other industries，it has the characteristics of Easy to realize automation, Avoid material pollution, Can make full use of space, Convenient for material transportation and recovery. and Economic and environmental protection，is a comprehensive technology, which involves fluid mechanics, material science, automation technology, manufacturing technology and other fields.。