Introduction to Lithium battery positive electrode delivery system, advantages, characteristics and principles of pneumatic conveying system

Lithium battery positive electrode delivery systemis a reliable material conveying equipment for conveying powdery materials under high pressure.，It is a product series that integrates Heating, cooling and drying, Reduce pollution, cut down on energy consumption, Process assistance and Bulk material transportation。The following is to introduce the Lithium battery positive electrode delivery system:

1、Brief introduction of Lithium battery positive electrode delivery system

Lithium battery positive electrode delivery systemIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，it has the characteristics of The conveying speed is faster, The failure rate is low, Flexible layout, Economic and environmental protection and Easy to use，at work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，it is widely used inmetallurgy,logistics,building material,cast,building materials and other industries，support customization。

Lithium battery positive electrode delivery system

2、Functional advantages of Lithium battery positive electrode delivery system

The advantages of Lithium battery positive electrode delivery system are as follows:

1. Environmental protection and pollution-free

Because the Lithium battery positive electrode delivery system is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

2. Wide application range

The Lithium battery positive electrode delivery system system can be suitable for all kinds of loose, dry and non-sticky materials, especially for some environmentally sensitive materials such as inflammable, explosive, toxic and harmful, and smelly, and can realize safe and reliable transportation.

3. Easy to maintain

The Lithium battery positive electrode delivery system system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

4. Flexible pipeline configuration

The Lithium battery positive electrode delivery system is carried out in a closed pipeline, which effectively reduces the flying and escape of dust, improves the working environment, reduces environmental pollution, and also protects materials from external pollution.

5. versatility

While conveying materials, the Lithium battery positive electrode delivery system system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

Lithium battery positive electrode delivery system

3、Lithium battery positive electrode delivery system structure composition

The Lithium battery positive electrode delivery system has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Lithium battery positive electrode delivery system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. control system

The control system is the "brain" of the Lithium battery positive electrode delivery system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Air source device

The air source device is the power core of the Lithium battery positive electrode delivery system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Lithium battery positive electrode delivery system

4、Lithium battery positive electrode delivery system work site real shot

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Lithium battery positive electrode delivery system

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Lithium battery positive electrode delivery system principle

Lithium battery positive electrode delivery systemat runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，it has the functions of Physical processing assistance, Environmental protection and pollution-free, Automatic control, Closed conveying and material handling。

Lithium battery positive electrode delivery system

6、Lithium battery positive electrode delivery system price consultation

The Lithium battery positive electrode delivery system price is introduced as follows:

1. Company size

hyde powder's scale and strength are relatively strong, the technology and technology of products produced by manufacturers are relatively advanced, and there is less waste of resources in the process of manufacturing, and the price of products will be relatively low.

2. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Lithium battery positive electrode delivery system manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Lithium battery positive electrode delivery system price can meet the purchasing needs of customers.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

5. Parameter size

There are many specifications and models of Lithium battery positive electrode delivery system, and different specifications and models must have different production processes. Moreover, the capital spent on the production of large-sized products must be much more than that of small-sized products, so the price of large-sized products is relatively high.

Lithium battery positive electrode delivery system

Lithium battery positive electrode delivery systemthe product looks beautiful.，features include Stable operation, versatility, Reduce material loss, Convenient for material transportation and recovery. and Convenient operation and management，It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.。