Introduction to Negative electrode material delivery system and pneumatic conveying working principle

Negative electrode material delivery systemIt refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.，is a Negative electrode material delivery system。

1、Brief introduction of Negative electrode material delivery system

Negative electrode material delivery systemis a kind of material conveying equipment which combines jet technology and fluidization technology.，the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as grade.、High conveying speed, good conveying quality and high conveying efficiency.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、Fully enclosed transportation system, materials are transported in closed pipes.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as grade.，it has been widely used in metallurgy, power, medicine, transportation, grain processing and other industries。

Negative electrode material delivery system

2、Negative electrode material delivery system application

Negative electrode material delivery systems have the following purposes.

1. Multi-point transportation

The Negative electrode material delivery system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Environmental protection and cleaner production

The Negative electrode material delivery system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

3. cut down on energy consumption

Although the power consumption of the Negative electrode material delivery system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. save energy and cut emissions

Although the Negative electrode material delivery system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Negative electrode material delivery system pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

Negative electrode material delivery system

3、Negative electrode material delivery system HD real shot

Excellent material selection,the product looks atmospheric., trustworthy, panoramic shooting, helpful for customer reference.。

Negative electrode material delivery system

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Structural characteristics of Negative electrode material delivery system

The Negative electrode material delivery system has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Negative electrode material delivery system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. control system

The control system is the "brain" of the Negative electrode material delivery system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Negative electrode material delivery system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Negative electrode material delivery system

5、Advantages of Negative electrode material delivery system principle

Negative electrode material delivery systemat runtime,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，widely used inchemical plant,heat-engine plant,cast,medicine,chemical industry and other industries，it has the functions of Automatic control, Automatic control, material handling, Physical processing assistance and Explosion-proof involves。

Negative electrode material delivery system

6、Negative electrode material delivery system price consultation

The Negative electrode material delivery system price is introduced as follows:

1. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

2. Self quality

Quality is an important and fundamental factor that affects the price of Negative electrode material delivery system. In the final analysis, its price depends on its quality. Usually, Negative electrode material delivery system with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A Negative electrode material delivery system with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

3. Brand strength

At present, there are various brands of Negative electrode material delivery system in shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Negative electrode material delivery system are different.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. region

hyde powder address:shandong(Province), the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

Negative electrode material delivery system

Negative electrode material delivery systemthe main features are automation, No secondary pollution, High reliability, Stable operation and Strong adaptability，is a popular Negative electrode material delivery system，at work,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.。