Introduction to Fully automatic feeder, introduction to Feeder advantages and characteristics

Fully automatic feederis widely used in powder engineering, pneumatic conveying and dust removal system.，the product looks beautiful.，is a kind of high quality and low price Fully automatic feeder，reliable quality。The following is to introduce the Fully automatic feeder:

1、Brief introduction of Fully automatic feeder

Fully automatic feederas an important bulk material conveying equipment，was developed and designed by hyde powder。

Fully automatic feeder

2、Fully automatic feeder use

Fully automatic feederCommonly used indust removal equipment discharges dust.,blowing-in,equipment feeding,ensure air tightness of the system,material handling and so on，support customization。

Fully automatic feeder

3、Fully automatic feeder advantage

The advantages of Fully automatic feeder are as follows:

1. Anti-leakage design

The bearing and gear box are far away from the valve body to avoid the influence of high temperature dust. At the same time, the front and rear end covers have good sealing performance, which effectively prevents dust from leaking out and prolongs the service life of moving parts and lubrication systems.

2. Multi-material handling

It is suitable for conveying powdery and granular materials and can meet the processing requirements of different materials.

3. Easy maintenance

The structural design of the Fully automatic feeder makes its maintenance relatively simple, and it is easy to carry out daily inspection and troubleshooting.

4. Automatic locking mechanism

The Fully automatic feeder has an automatic locking mechanism and the electric push rod has a two-way safety system, which makes the work reliable, stable and flexible.

5. Good sealing performance

Excellent sealing structure, preventing dust from leaking out and prolonging the service life of motor parts and lubrication system.

Fully automatic feeder

4、Introduction of Fully automatic feeder characteristics

Fully automatic feederhigh wear resistance,handsome appearance,low noise,run smoothly,easy maintenance，widely used in dock, building materials cement, chemical raw material, energy mining industry, plastic metallurgy and other fields，it has the structure of impeller, motor and transmission device, main valve (including shell, end cover, impeller, sealing structure, etc.), rotor and shell and vent，Fully automatic feederThe overall structural design is simple and novel.，It has a wide range of uses, including blowing-in, prevent gas or dust leakage, ensure air tightness of the system, equipment feeding and continuously and uniformly feed or discharge.，it is an ideal choice for customers to buy Fully automatic feeder。

Fully automatic feeder

5、Structural characteristics of Fully automatic feeder

The Fully automatic feeder has the following structure

1. sealing element

Seals are used to ensure the sealing performance of the Fully automatic feeder in the working process and prevent material leakage and gas backflow. High-quality seals can improve the working efficiency and service life of equipment.

2. Rotor and shell

The rotor is the core component of the Fully automatic feeder, and usually consists of several blades, which rotate in the cylindrical casing. Materials fall from the upper hopper and are filled in the spaces between the blades. With the rotation of the impeller, they are transported to the lower part and discharged from the shell to protect the internal mechanism and seal, and prevent the leakage of materials and the entry of external impurities.

3. impeller

Impeller is the key part of the Fully automatic feeder to realize material transportation. Its structural design is reasonable, which can ensure the uniform distribution of materials in the spaces between the impellers and be transported smoothly with the rotation of the impellers.

4. Motor and transmission device

The motor provides power for the Fully automatic feeder, and the power is transmitted to the impeller through transmission devices (such as gears and sprockets) to make it rotate. The transmission device shall be designed to ensure smooth and reliable power transmission.

5. Equalizing exhaust port

The side of the Fully automatic feeder body is provided with a pressure equalizing exhaust port, which can exhaust the high-pressure gas brought by the rotation of the impeller, reduce the phenomenon of gas ejection, and facilitate the smooth falling of materials.

Fully automatic feeder

6、hyde workshop real shot

The finished products of the Fully automatic feeder factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde powder

The finished products of the Fully automatic feeder factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Fully automatic feederthe advantage is Impeller, bushing and other key components are made of high-quality wear-resistant materials, which can withstand the friction and wear during material transportation and prolong the service life of the equipment.、Excellent sealing structure, preventing dust from leaking out and prolonging the service life of motor parts and lubrication system.、With automatic locking mechanism and electric push rod with two-way insurance system, the work is reliable, stable and flexible.、The design of special sealing structure enables the Fully automatic feeder to maintain high sealing performance during transportation, reduce material leakage and improve transportation efficiency.、It is suitable for conveying powdery and granular materials and can meet the processing requirements of different materials.，the principle is simple.Through the rotation of the rotor with several blades in the cylindrical casing, the materials are uniformly and continuously transported from the upper hopper to the lower part to realize the function of feeding or discharging. In the pneumatic conveying system, the Fully automatic feeder is one of the key components, which can supply materials evenly into the clinker pipe. At the same time, in the separation and dust collection part of the system, it also has the functions of unloader and air lock.，is an efficient, stable and reliable material conveying equipment.。