Introduction to HDSR300 Roots blower and blower structure principle

HDSR300 Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，it is widely used in water treatment, sewage disposal, aquaculture, mine and Dust removal，the advantage is It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.、In the process of air intake and exhaust, the HDSR300 Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Due to the adoption of synchronous gear transmission and small gap design, the HDSR300 Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the HDSR300 Roots blower perform well in many situations where stable airflow is needed.。

1、Brief introduction of HDSR300 Roots blower

HDSR300 Roots bloweris a positive displacement blower with forced gas transmission characteristics.，the product looks atmospheric.，is a HDSR300 Roots blower newly developed by hyde。

HDSR300 Roots blower

2、HDSR300 Roots blower field real shot

Haide HDSR300 Roots blower manufacturing factory。

HDSR300 Roots blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Structural advantages of HDSR300 Roots blower

The HDSR300 Roots blower has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. impeller

It is the rotating part of the HDSR300 Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf HDSR300 Roots blower has gradually replaced the two-leaf HDSR300 Roots blower.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. muffler

Used to reduce the noise caused by airflow pulsation when the HDSR300 Roots blower enters and exits.

HDSR300 Roots blower

4、Introduction of advantages of HDSR300 Roots blower

HDSR300 Roots blowers have the following advantages.

1. Wide application range

HDSR300 Roots blowers are widely used in many fields, such as water treatment, etc., especially suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

2. Low noise and vibration

The three-leaf rotor structure of the HDSR300 Roots blower makes it less vibration and noise. This feature makes the HDSR300 Roots blower work normally in situations where a quiet environment is needed.

3. energy-efficient

The HDSR300 Roots blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

4. be of simple construction

The HDSR300 Roots blower is simple in design and easy to manufacture and maintain.

5. Long service life

The mechanical friction of the HDSR300 Roots blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

HDSR300 Roots blower

5、HDSR300 Roots blower application

HDSR300 Roots blowerIt is mostly used in supply air, dehydrate, pick up the suction, mix, aquaculture, aeration and so on，is a kind of high quality and low price HDSR300 Roots blower，the product looks beautiful.，it has the functions of cool, material handling, aeration, ventilation and dry，the principle is simple.The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.。

HDSR300 Roots blower

HDSR300 Roots blowermultifunctional, with functions such as pick up the suction, supply air, exhaust emission, dehydrate and material fluidization，at runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，the models are complete and can meet the needs of different users for different purposes.。