Introduction to High pressure stainless steel Roots blower and Three leaf Roots blower structure principle

High pressure stainless steel Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，the main features are convenient manufacture, stable and reliable, wide application range, wide application range and economical and durable，the main structure includes case, bearing, fuel tank, rotator and wallboard，at the start of the operation,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，is developed and improved by hyde powder。The following is to introduce the High pressure stainless steel Roots blower:

1、Brief introduction of High pressure stainless steel Roots blower

High pressure stainless steel Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，It has a wide range of uses, including Material fluidization, pick up the suction, mix, aquaculture and pick up the suction，super quality and competitive price。

High pressure stainless steel Roots blower

2、High pressure stainless steel Roots blower introduction video

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site High pressure stainless steel Roots blowert operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

High pressure stainless steel Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. It is a product series that integrates sewage disposal, Ventilation, dry, supply air and exhaust emission。

3、High pressure stainless steel Roots blower structure

The High pressure stainless steel Roots blower structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. muffler

Used to reduce the noise caused by airflow pulsation when the High pressure stainless steel Roots blower enters and exits.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the High pressure stainless steel Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

High pressure stainless steel Roots blower

4、Working principle of High pressure stainless steel Roots blower

High pressure stainless steel Roots blowerGas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，multifunctional, with functions such as dry, cool, mix, aeration and material fluidization，Due to the adoption of synchronous gear transmission and small gap design, the High pressure stainless steel Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the High pressure stainless steel Roots blower perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Because of the design of three-blade rotor, the High pressure stainless steel Roots blower has little vibration and low noise during operation, and the operation is stable and reliable，the main structure includes muffler, impeller, case, muffler, wallboard and so on，High pressure stainless steel Roots blowerThe overall structural design is simple, diverse and beautiful.，features include be of simple construction, convenient manufacture, economical and durable, run smoothly and energy-efficient。

High pressure stainless steel Roots blower

5、Introduction of High pressure stainless steel Roots blower characteristics

High pressure stainless steel Roots blowerthe main features are stable and reliable, Precise control, wide application range, convenient maintenance and strong adaptability，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the High pressure stainless steel Roots blower less vibration and noise.、Due to the adoption of synchronous gear transmission and small gap design, the High pressure stainless steel Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、In the process of air intake and exhaust, the High pressure stainless steel Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.，the product looks atmospheric.，support customization。

High pressure stainless steel Roots blower

High pressure stainless steel Roots blowerat runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，is a kind of high quality and low price High pressure stainless steel Roots blower，it has the functions of pressurized transportation, ventilation, material handling, aquaculture and supply air。