What is a Wear resistant three blade Roots blower? Introduction to the advantages and characteristics of Three leaf Roots blower functions

Wear resistant three blade Roots bloweris a double impeller synchronous compression machine, belonging to a positive displacement blower.。

1、Brief introduction of Wear resistant three blade Roots blower

Wear resistant three blade Roots bloweris a positive displacement blower.，It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Because of the design of three-blade rotor, the Wear resistant three blade Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、Due to the adoption of synchronous gear transmission and small gap design, the Wear resistant three blade Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Wear resistant three blade Roots blower less vibration and noise.、In the process of air intake and exhaust, the Wear resistant three blade Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，is a common Wear resistant three blade Roots blower，is an advanced Wear resistant three blade Roots blower developed by our company in combination with the actual situation of the industry。

Wear resistant three blade Roots blower

2、Wear resistant three blade Roots blower display

Wear resistant three blade Roots blower specifications and models are complete, and customers can choose at will. High-definition pictures are available for customers' reference. Customers are welcome to visit our factory.。

Wear resistant three blade Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Wear resistant three blade Roots blower structure composition

The Wear resistant three blade Roots blower structure is introduced as follows:

1. impeller

It is the rotating part of the Wear resistant three blade Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Wear resistant three blade Roots blower has gradually replaced the two-leaf Wear resistant three blade Roots blower.

2. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Wear resistant three blade Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Wear resistant three blade Roots blower enters and exits.

Wear resistant three blade Roots blower

4、Working principle of Wear resistant three blade Roots blower

Wear resistant three blade Roots blowerat work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，it is an ideal choice for customers to buy Wear resistant three blade Roots blower。

Wear resistant three blade Roots blower

5、Wear resistant three blade Roots blower performance advantage

The advantages of Wear resistant three blade Roots blower are as follows:

1. Durable performance

Impeller and shaft are integrated structure, and the impeller is not worn, so the performance of the fan is durable and can run continuously for a long time.

2. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

3. Convenient maintenance

The structure of the Wear resistant three blade Roots blower is relatively simple and easy to maintain.

4. Compact structure and small floor space.

The Wear resistant three blade Roots blower is simple in design and easy to manufacture and maintain.

5. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

Wear resistant three blade Roots blower

6、Brief introduction of Wear resistant three blade Roots blower

Wear resistant three blade Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，Commonly used inPressurized transportation,pick up the suction,Desulfurization oxidation,Ventilation,cool and so on，features include durable performance, wide application range, low noise, wide application range and strong adaptability，it has the structure of impeller, bearing, rotator, fuel tank and muffler，Wear resistant three blade Roots blowerThe overall structural design is relatively simple and compact.，multifunctional, with functions such as material handling, sewage disposal, desulfurization oxidation, dehydrate and pick up the suction。

Wear resistant three blade Roots blower

Wear resistant three blade Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of bearing, rotator, wallboard, case and wallboard。