Introduction to Carbon steel Roots blower and blower advantages and features

Carbon steel Roots bloweris a positive displacement blower.，Widely used in pick up the suction, exhaust emission, dehydrate, dry and Ventilation。The following is to introduce the Carbon steel Roots blower:

1、Brief introduction of Carbon steel Roots blower

Carbon steel Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，the advantage is It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Due to the adoption of synchronous gear transmission and small gap design, the Carbon steel Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、In the process of air intake and exhaust, the Carbon steel Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，the main features are wide application range, run smoothly, economical and durable, stable and reliable and convenient maintenance，the principle is simple.The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，it is an ideal choice for customers to buy Carbon steel Roots blower。

Carbon steel Roots blower

2、Advantages of Carbon steel Roots blower principle

Carbon steel Roots blowerin the course of work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，the main structure includes bearing, impeller, rotator, wallboard and muffler，productThe overall structural design is relatively simple，multifunctional, with functions such as exhaust emission, cool, desulfurization oxidation, aeration and dry，The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Carbon steel Roots blower perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Carbon steel Roots blower less vibration and noise.、Small size and small floor space make it easy to arrange and install in places with limited space.、Because of the design of three-blade rotor, the Carbon steel Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.，has been favored by more and more customers.。

Carbon steel Roots blower

3、Carbon steel Roots blower HD picture real shot

The styles and designs of Carbon steel Roots blower are diverse, and the specifications and models can be tailored according to users' needs, providing high-definition drawings for our customers' reference.。

Carbon steel Roots blower

Note: All the pictures in this article were taken by hyde manufacturer.。

4、Structural characteristics of Carbon steel Roots blower

The Carbon steel Roots blower has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. impeller

It is the rotating part of the Carbon steel Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Carbon steel Roots blower has gradually replaced the two-leaf Carbon steel Roots blower.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Carbon steel Roots blower enters and exits.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Carbon steel Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Carbon steel Roots blower

5、Carbon steel Roots blower price advantage

The Carbon steel Roots blower price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Carbon steel Roots blower manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Carbon steel Roots blower price can meet the purchasing needs of customers.

2. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. deploy

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. hyde pays special attention to the hardware configuration of products, so hyde powder Carbon steel Roots blower has a higher cost performance.

4. Model specification

There are many product specifications and models in the market. The efficiency and power of different specifications and models are different, and the price is naturally different. Customers need to choose the appropriate specifications and models according to their own needs.

5. product costs

The cost of manufacturing Carbon steel Roots blower varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

Carbon steel Roots blower

6、hyde's strength

The company has many years of Carbon steel Roots blower manufacturing experience, large scale and strong strength.。

hyde powder

Carbon steel Roots blowerat the start of the operation,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，generally, it is composed of rotator, case, muffler, impeller, wallboard and other major components，This Carbon steel Roots blowerThe overall structural design is simple and novel.。