Introduction to Hydrogen pressurized Roots blower, Roots Blower advantages, characteristics and principles

Hydrogen pressurized Roots bloweris a positive displacement blower with forced gas transmission characteristics.，Mainly used formaterial handling,pick up the suction,dry,Desulfurization oxidation andmix，widely used in aquaculture, Pharmaceutical and chemical industries, pneumatic transport, pottery and porcelain, chemical fertilizer and other fields，can be customized according to user's needs.。The following is to introduce the Hydrogen pressurized Roots blower:

1、Brief introduction of Hydrogen pressurized Roots blower

Hydrogen pressurized Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the product looks beautiful.，at runtime,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，is a Hydrogen pressurized Roots blower，it is an ideal choice for customers to buy Hydrogen pressurized Roots blower。

Hydrogen pressurized Roots blower

2、Structural characteristics of Hydrogen pressurized Roots blower

The Hydrogen pressurized Roots blower structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the Hydrogen pressurized Roots blower enters and exits.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Hydrogen pressurized Roots blower

3、Hydrogen pressurized Roots blower application

Hydrogen pressurized Roots blowerIt is mostly used in Ventilation, Pressurized transportation, supply air, dehydrate, cool, exhaust emission and so on，it has the functions of cool, mix, material fluidization, exhaust emission and dehydrate。

Hydrogen pressurized Roots blower

4、Hydrogen pressurized Roots blower function

Hydrogen pressurized Roots blowermultifunctional, with functions such as aquaculture, pick up the suction, ventilation, desulfurization oxidation and dry，the product looks atmospheric.，at the start of the operation,When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，is an advanced Hydrogen pressurized Roots blower developed by our company in combination with the actual situation of the industry。

Hydrogen pressurized Roots blower

5、Introduction of advantages of Hydrogen pressurized Roots blower

Hydrogen pressurized Roots blowers have the following advantages.

1. Long service life

The mechanical friction of the Hydrogen pressurized Roots blower is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

2. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

3. Strong adaptability

The Hydrogen pressurized Roots blower is suitable for conveying and pressurizing a variety of gases, including air, oxygen, nitrogen, etc., and can work stably under different pressures and flows.

4. Low noise and vibration

The three-leaf rotor structure of the Hydrogen pressurized Roots blower makes it less vibration and noise. This feature makes the Hydrogen pressurized Roots blower work normally in situations where a quiet environment is needed.

5. Simple structure and convenient manufacture

The Hydrogen pressurized Roots blower is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

Hydrogen pressurized Roots blower

6、How much is the Hydrogen pressurized Roots blower?

The Hydrogen pressurized Roots blower price is introduced as follows:

1. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Company size

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Hydrogen pressurized Roots blower. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Hydrogen pressurized Roots blower will be different.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

Hydrogen pressurized Roots blower

Hydrogen pressurized Roots bloweris a common Hydrogen pressurized Roots blower，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Hydrogen pressurized Roots blower less vibration and noise.、Because of the design of three-blade rotor, the Hydrogen pressurized Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the Hydrogen pressurized Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.。