What is a Hydrogen pressurized three blade Roots blower? Three leaf Roots blower specifications, models, and parameters

Hydrogen pressurized three blade Roots bloweris a positive displacement blower.，It has the functions of pick up the suction, Ventilation, mix, aeration and dry，in the course of work,The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，The overall structural design is simple and novel.，it mainly includes fuel tank, muffler, case, wallboard and wallboard，the main features are smooth operation, energy-efficient, convenient maintenance, energy-efficient and smooth operation。

1、Brief introduction of Hydrogen pressurized three blade Roots blower

Hydrogen pressurized three blade Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，is a popular Hydrogen pressurized three blade Roots blower。

Hydrogen pressurized three blade Roots blower

2、Hydrogen pressurized three blade Roots blower structure composition

The Hydrogen pressurized three blade Roots blower has the following structure

1. impeller

It is the rotating part of the Hydrogen pressurized three blade Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Hydrogen pressurized three blade Roots blower has gradually replaced the two-leaf Hydrogen pressurized three blade Roots blower.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Hydrogen pressurized three blade Roots blower enters and exits.

Hydrogen pressurized three blade Roots blower

3、Introduction of Hydrogen pressurized three blade Roots blower characteristics

Hydrogen pressurized three blade Roots blowerwide application range,durable performance,economical and durable,strong adaptability,Precise control，widely used inmine,sewage disposal,Dust removal,Textile light textile,Food and beverage processing and other industries，Simple structure and advanced technology.，it is usually composed of fuel tank, case, rotator, bearing and impeller，Widely used in sewage disposal, cool, exhaust emission, Pressurized transportation and Material fluidization，the product looks atmospheric.。

Hydrogen pressurized three blade Roots blower

4、Hydrogen pressurized three blade Roots blower introduction video

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Hydrogen pressurized three blade Roots blower production process and production site, and gain favorable comments and recognition from customers.。

Hydrogen pressurized three blade Roots blower

As you can see from the live video.，hyde it is widely used in Environmental protection industry, aquaculture, aquaculture, water treatment, petrochemical industry and other industries。

5、Structural advantages of Hydrogen pressurized three blade Roots blower

The Hydrogen pressurized three blade Roots blower has the following structure

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Hydrogen pressurized three blade Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

3. impeller

It is the rotating part of the Hydrogen pressurized three blade Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Hydrogen pressurized three blade Roots blower has gradually replaced the two-leaf Hydrogen pressurized three blade Roots blower.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Hydrogen pressurized three blade Roots blower

Hydrogen pressurized three blade Roots blowerthe principle is simple.It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，is a kind of high quality and low price Hydrogen pressurized three blade Roots blower。