Introduction to Three leaf Roots blower for biogas pressurization and Three leaf Roots blower structure principle

Three leaf Roots blower for biogas pressurizationis a double impeller synchronous compression machine, belonging to a positive displacement blower.。

1、Brief introduction of Three leaf Roots blower for biogas pressurization

Three leaf Roots blower for biogas pressurizationis a positive displacement blower with forced gas transmission characteristics.，is a popular Three leaf Roots blower for biogas pressurization，it is widely used in coal chemical industry, aquaculture, sewage disposal, water treatment, coal chemical industry and other industries，features include economical and durable, convenient maintenance, wide application range, stable and reliable and smooth operation，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Three leaf Roots blower for biogas pressurization less vibration and noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots blower for biogas pressurization perform well in many situations where stable airflow is needed.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Due to the adoption of synchronous gear transmission and small gap design, the Three leaf Roots blower for biogas pressurization runs stably and reliably, without contact and wear parts, and has a long service life.。

Three leaf Roots blower for biogas pressurization

2、Three leaf Roots blower for biogas pressurization performance advantage

The advantages of Three leaf Roots blower for biogas pressurization are as follows:

1. energy-efficient

The Three leaf Roots blower for biogas pressurization has high efficiency and can realize gas transportation and pressurization with low energy consumption.

2. Reliable operation and convenient maintenance

The air volume of the Three leaf Roots blower for biogas pressurization is proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Three leaf Roots blower for biogas pressurization perform well in many situations where stable airflow is needed.

3. Durable performance

The impeller and shaft of the Three leaf Roots blower for biogas pressurization are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

4. Long service life

The mechanical friction of the Three leaf Roots blower for biogas pressurization is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

5. Convenient maintenance

The structure of the Three leaf Roots blower for biogas pressurization is relatively simple and easy to maintain.

Three leaf Roots blower for biogas pressurization

3、Structural advantages of Three leaf Roots blower for biogas pressurization

The Three leaf Roots blower for biogas pressurization has the following structure

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Three leaf Roots blower for biogas pressurization, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. impeller

It is the rotating part of the Three leaf Roots blower for biogas pressurization, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Three leaf Roots blower for biogas pressurization has gradually replaced the two-leaf Three leaf Roots blower for biogas pressurization.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Three leaf Roots blower for biogas pressurization enters and exits.

Three leaf Roots blower for biogas pressurization

4、Three leaf Roots blower for biogas pressurization characteristics

Three leaf Roots blower for biogas pressurizationenergy-efficient,low noise,Precise control,be of simple construction,run smoothly，it is mainly composed of rotator, impeller, muffler, case and rotator，This productThe overall structural design is simple and novel.，is based on hyde powder is a Three leaf Roots blower for biogas pressurization newly developed by hyde。

Three leaf Roots blower for biogas pressurization

5、Three leaf Roots blower for biogas pressurization principle

Three leaf Roots blower for biogas pressurizationthe principle is simple.The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，the product looks atmospheric.，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of muffler, fuel tank, impeller, wallboard and bearing，it is widely used in Dust removal, petrify, make paper, petrochemical industry and building materials，is a Three leaf Roots blower for biogas pressurization newly developed by hyde powder。

Three leaf Roots blower for biogas pressurization

Three leaf Roots blower for biogas pressurizationis a common Three leaf Roots blower for biogas pressurization，the models are complete and can meet the needs of different users for different purposes.。