What is a Nitrogen pressurized Roots blower? blower specifications, models, and parameters

Nitrogen pressurized Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，the principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，The structural design is simple, novel and special.，it is mainly composed of muffler, bearing, rotator, impeller and fuel tank，the product looks beautiful.，multifunctional, with functions such as ventilation, material fluidization, mix, pick up the suction and material handling。

1、Brief introduction of Nitrogen pressurized Roots blower

Nitrogen pressurized Roots bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.。

Nitrogen pressurized Roots blower

2、Nitrogen pressurized Roots blower video live broadcast

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Nitrogen pressurized Roots blowert operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Nitrogen pressurized Roots blower

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the main structure includes muffler, rotator, wallboard, case, bearing and so on，Nitrogen pressurized Roots blowerThe overall structural design is simple, diverse and beautiful.。

3、Nitrogen pressurized Roots blower structure composition

The Nitrogen pressurized Roots blower structure is introduced as follows:

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. muffler

Used to reduce the noise caused by airflow pulsation when the Nitrogen pressurized Roots blower enters and exits.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. impeller

It is the rotating part of the Nitrogen pressurized Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Nitrogen pressurized Roots blower has gradually replaced the two-leaf Nitrogen pressurized Roots blower.

Nitrogen pressurized Roots blower

4、Working principle of Nitrogen pressurized Roots blower

Nitrogen pressurized Roots blowerat runtime,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.。

Nitrogen pressurized Roots blower

5、How much is the Nitrogen pressurized Roots blower?

The Nitrogen pressurized Roots blower price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. regional difference

hyde powder the address is located at:jinan, the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

3. select a qualified person

The quality of material selection is one of the main factors that directly affect the Nitrogen pressurized Roots blower. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

4. sales mode

hyde has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

5. Self quality

The Nitrogen pressurized Roots blower is made of high-quality materials, and the cost of the product is high, so the price of the product will also rise. hyde powder has always adhered to high quality in the construction of Nitrogen pressurized Roots blower and won the trust of customers.

Nitrogen pressurized Roots blower

6、hyde powder after-sales service

Our company can provide you with all-round, high-quality and professional services, especially in after-sales service, which has been unanimously recognized and favored by our customers.。

hyde

Nitrogen pressurized Roots blowerusually used in port, petrify, aquaculture, Flue gas treatment, Pharmaceutical and chemical industries and other fields，is a kind of high quality and low price Nitrogen pressurized Roots blower，Mainly used forsewage disposal,mix,aquaculture,aeration andpick up the suction。