Introduction to Unpacking pneumatic conveying and pneumatic conveying working principle

Unpacking pneumatic conveyingis a kind of material conveying equipment which combines jet technology and fluidization technology.，is a Unpacking pneumatic conveying，at the start of the operation,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，the product looks atmospheric.，The price is relatively low.。The following is to introduce the Unpacking pneumatic conveying:

1、Brief introduction of Unpacking pneumatic conveying

Unpacking pneumatic conveyingis a method of conveying materials through pipelines by using air flow with a certain speed.。

Unpacking pneumatic conveying

2、Video analysis of Unpacking pneumatic conveying

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Unpacking pneumatic conveying production process and production site, and gain favorable comments and recognition from customers.。

Unpacking pneumatic conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. is a technology that uses compressed air or aerodynamic force to transport materials from one point to another.。

3、Unpacking pneumatic conveying use

The purpose of Unpacking pneumatic conveying is introduced as follows:

1. save energy and cut emissions

Although the Unpacking pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Mixing and classification

In the process of conveying, the Unpacking pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

3. Multi-point transportation

The Unpacking pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. Process assistance

In some production processes, Unpacking pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Unpacking pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

5. Long distance transportation

The Unpacking pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Unpacking pneumatic conveying

4、Structural advantages of Unpacking pneumatic conveying

The Unpacking pneumatic conveying has the following structure

1. control system

The control system is the "brain" of the Unpacking pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. control system

The control system is the "brain" of the Unpacking pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Unpacking pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Unpacking pneumatic conveying

5、Unpacking pneumatic conveying price advantage

The Unpacking pneumatic conveying price is introduced as follows:

1. Model type

There are many product specifications and models in the market. The efficiency and power of different specifications and models are different, and the price is naturally different. Customers need to choose the appropriate specifications and models according to their own needs.

2. Brand strength

At present, there are various brands of Unpacking pneumatic conveying in shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Unpacking pneumatic conveying are different.

3. Reasonable cost

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Unpacking pneumatic conveying.

4. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Unpacking pneumatic conveying price and service can meet the actual needs of customers.

5. Less intermediate links

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

Unpacking pneumatic conveying

6、How to choose the right product manufacturer?

Choosing a suitable Unpacking pneumatic conveying manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Unpacking pneumatic conveying products that meet the demand and have good cost performance.。

hyde powder

Unpacking pneumatic conveyingfeatures include High productivity, Easy to realize automation, automation, Flexible pipeline layout and Efficient and flexible，it has the functions of Closed conveying, Automatic control, Explosion-proof involves, Physical processing assistance and Environmental protection and pollution-free，the product looks beautiful.。