What is a Hydrogen sulfide pressurized Roots blower? Introduction to the Working Principle of Three leaf Roots blower

Hydrogen sulfide pressurized Roots bloweris an efficient volumetric gas conveying and pressurizing equipment.，the main structure includes bearing, muffler, rotator, wallboard and case，This productThe structural design is simple, novel and special.，it has the characteristics of smooth operation, wide application range, convenient maintenance, be of simple construction and convenient manufacture。

1、Brief introduction of Hydrogen sulfide pressurized Roots blower

Hydrogen sulfide pressurized Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，It has a wide range of uses, and is often used indehydrate,aeration,Pressurized transportation,pick up the suction,material handling and so on，Commonly used inMaterial fluidization,cool,sewage disposal,supply air,Desulfurization oxidation and so on，is designed by hyde with advanced technology。

Hydrogen sulfide pressurized Roots blower

2、Hydrogen sulfide pressurized Roots blower principle

Hydrogen sulfide pressurized Roots blowerat work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，it is widely used in Flue gas treatment, coal chemical industry, power, manufacturing industry, aquaculture and other industries，is a kind of high quality and low price Hydrogen sulfide pressurized Roots blower，In the process of air intake and exhaust, the Hydrogen sulfide pressurized Roots blower will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Small size and small floor space make it easy to arrange and install in places with limited space.、Due to the adoption of synchronous gear transmission and small gap design, the Hydrogen sulfide pressurized Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Because of the design of three-blade rotor, the Hydrogen sulfide pressurized Roots blower has little vibration and low noise during operation, and the operation is stable and reliable，It can be used for Ventilation, exhaust emission, supply air, mix, Desulfurization oxidation, aeration and so on。

Hydrogen sulfide pressurized Roots blower

3、Hydrogen sulfide pressurized Roots blower field real shot

On-site aerial photography of Hydrogen sulfide pressurized Roots blower。

Hydrogen sulfide pressurized Roots blower

As you can see from the live video.，hyde powder is a popular Hydrogen sulfide pressurized Roots blower。

4、Structural advantages of Hydrogen sulfide pressurized Roots blower

The Hydrogen sulfide pressurized Roots blower has the following structure

1. muffler

Used to reduce the noise caused by airflow pulsation when the Hydrogen sulfide pressurized Roots blower enters and exits.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. impeller

It is the rotating part of the Hydrogen sulfide pressurized Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Hydrogen sulfide pressurized Roots blower has gradually replaced the two-leaf Hydrogen sulfide pressurized Roots blower.

5. impeller

It is the rotating part of the Hydrogen sulfide pressurized Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Hydrogen sulfide pressurized Roots blower has gradually replaced the two-leaf Hydrogen sulfide pressurized Roots blower.

Hydrogen sulfide pressurized Roots blower

5、Hydrogen sulfide pressurized Roots blower performance advantage

Hydrogen sulfide pressurized Roots blowers have the following advantages.

1. Low noise and vibration

The three-leaf rotor structure of the Hydrogen sulfide pressurized Roots blower makes it less vibration and noise. This feature makes the Hydrogen sulfide pressurized Roots blower work normally in situations where a quiet environment is needed.

2. Strong adaptability

The Hydrogen sulfide pressurized Roots blower is suitable for conveying and pressurizing a variety of gases, including air, oxygen, nitrogen, etc., and can work stably under different pressures and flows.

3. Durable performance

The impeller and shaft of the Hydrogen sulfide pressurized Roots blower are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

4. Convenient maintenance

The structure of the Hydrogen sulfide pressurized Roots blower is relatively simple and easy to maintain.

5. Run smoothly

The structure form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.

Hydrogen sulfide pressurized Roots blower

6、Structural characteristics of Hydrogen sulfide pressurized Roots blower

The Hydrogen sulfide pressurized Roots blower structure is introduced as follows:

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Hydrogen sulfide pressurized Roots blower enters and exits.

Hydrogen sulfide pressurized Roots blower

Hydrogen sulfide pressurized Roots blowerusually used in pneumatic transport, mine, pottery and porcelain, sewage disposal, smelt and other fields，at runtime,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.。